2
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Visible Light Photoredox-Catalyzed Decarboxylative Alkylation of 3-Aryl-Oxetanes and Azetidines via Benzylic Tertiary Radicals and Implications of Benzylic Radical Stability

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Four-membered heterocycles offer exciting potential as small polar motifs in medicinal chemistry but require further methods for incorporation. Photoredox catalysis is a powerful method for the mild generation of alkyl radicals for C–C bond formation. The effect of ring strain on radical reactivity is not well understood, with no studies that address this question systematically. Examples of reactions that involve benzylic radicals are rare, and their reactivity is challenging to harness. This work develops a radical functionalization of benzylic oxetanes and azetidines using visible light photoredox catalysis to prepare 3-aryl-3-alkyl substituted derivatives and assesses the influence of ring strain and heterosubstitution on the reactivity of small-ring radicals. 3-Aryl-3-carboxylic acid oxetanes and azetidines are suitable precursors to tertiary benzylic oxetane/azetidine radicals which undergo conjugate addition into activated alkenes. We compare the reactivity of oxetane radicals to other benzylic systems. Computational studies indicate that Giese additions of unstrained benzylic radicals into acrylates are reversible and result in low yields and radical dimerization. Benzylic radicals as part of a strained ring, however, are less stable and more π-delocalized, decreasing dimer and increasing Giese product formation. Oxetanes show high product yields due to ring strain and Bent’s rule rendering the Giese addition irreversible.

          Related collections

          Most cited references120

          • Record: found
          • Abstract: found
          • Article: not found

          Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy.

          Gaussian basis sets of quadruple zeta valence quality for Rb-Rn are presented, as well as bases of split valence and triple zeta valence quality for H-Rn. The latter were obtained by (partly) modifying bases developed previously. A large set of more than 300 molecules representing (nearly) all elements-except lanthanides-in their common oxidation states was used to assess the quality of the bases all across the periodic table. Quantities investigated were atomization energies, dipole moments and structure parameters for Hartree-Fock, density functional theory and correlated methods, for which we had chosen Møller-Plesset perturbation theory as an example. Finally recommendations are given which type of basis set is used best for a certain level of theory and a desired quality of results.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Visible light photoredox catalysis with transition metal complexes: applications in organic synthesis.

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Universal solvation model based on solute electron density and on a continuum model of the solvent defined by the bulk dielectric constant and atomic surface tensions.

              We present a new continuum solvation model based on the quantum mechanical charge density of a solute molecule interacting with a continuum description of the solvent. The model is called SMD, where the "D" stands for "density" to denote that the full solute electron density is used without defining partial atomic charges. "Continuum" denotes that the solvent is not represented explicitly but rather as a dielectric medium with surface tension at the solute-solvent boundary. SMD is a universal solvation model, where "universal" denotes its applicability to any charged or uncharged solute in any solvent or liquid medium for which a few key descriptors are known (in particular, dielectric constant, refractive index, bulk surface tension, and acidity and basicity parameters). The model separates the observable solvation free energy into two main components. The first component is the bulk electrostatic contribution arising from a self-consistent reaction field treatment that involves the solution of the nonhomogeneous Poisson equation for electrostatics in terms of the integral-equation-formalism polarizable continuum model (IEF-PCM). The cavities for the bulk electrostatic calculation are defined by superpositions of nuclear-centered spheres. The second component is called the cavity-dispersion-solvent-structure term and is the contribution arising from short-range interactions between the solute and solvent molecules in the first solvation shell. This contribution is a sum of terms that are proportional (with geometry-dependent proportionality constants called atomic surface tensions) to the solvent-accessible surface areas of the individual atoms of the solute. The SMD model has been parametrized with a training set of 2821 solvation data including 112 aqueous ionic solvation free energies, 220 solvation free energies for 166 ions in acetonitrile, methanol, and dimethyl sulfoxide, 2346 solvation free energies for 318 neutral solutes in 91 solvents (90 nonaqueous organic solvents and water), and 143 transfer free energies for 93 neutral solutes between water and 15 organic solvents. The elements present in the solutes are H, C, N, O, F, Si, P, S, Cl, and Br. The SMD model employs a single set of parameters (intrinsic atomic Coulomb radii and atomic surface tension coefficients) optimized over six electronic structure methods: M05-2X/MIDI!6D, M05-2X/6-31G, M05-2X/6-31+G, M05-2X/cc-pVTZ, B3LYP/6-31G, and HF/6-31G. Although the SMD model has been parametrized using the IEF-PCM protocol for bulk electrostatics, it may also be employed with other algorithms for solving the nonhomogeneous Poisson equation for continuum solvation calculations in which the solute is represented by its electron density in real space. This includes, for example, the conductor-like screening algorithm. With the 6-31G basis set, the SMD model achieves mean unsigned errors of 0.6-1.0 kcal/mol in the solvation free energies of tested neutrals and mean unsigned errors of 4 kcal/mol on average for ions with either Gaussian03 or GAMESS.
                Bookmark

                Author and article information

                Journal
                J Org Chem
                J Org Chem
                jo
                joceah
                The Journal of Organic Chemistry
                American Chemical Society
                0022-3263
                1520-6904
                03 March 2023
                19 May 2023
                : 88
                : 10 , Progress in Photocatalysis for Organic Chemistry
                : 6476-6488
                Affiliations
                []Department of Chemistry, Imperial College London , Molecular Sciences Research Hub, White City Campus, Wood Lane, London W12 0BZ, U.K.
                []Department of Chemistry, Chemistry Research Laboratory, University of Oxford , Oxford OX1 3TA, U.K.
                [§ ]Pfizer Global Research and Development , 445 Eastern Point Rd., Groton, Connecticut 06340, United States
                Author notes
                Author information
                https://orcid.org/0000-0002-9471-5888
                https://orcid.org/0000-0002-8403-9636
                https://orcid.org/0000-0002-8394-2516
                https://orcid.org/0000-0003-3459-3767
                https://orcid.org/0000-0002-5712-9222
                https://orcid.org/0000-0002-6062-8209
                https://orcid.org/0000-0003-3993-5818
                Article
                10.1021/acs.joc.3c00083
                10204094
                36868184
                f77a27da-d31e-4f2f-af1c-b0dabcf8567c
                © 2023 The Authors. Published by American Chemical Society

                Permits the broadest form of re-use including for commercial purposes, provided that author attribution and integrity are maintained ( https://creativecommons.org/licenses/by/4.0/).

                History
                : 12 January 2023
                Funding
                Funded by: Pfizer, doi 10.13039/100004319;
                Award ID: NA
                Funded by: Imperial College London, doi 10.13039/501100000761;
                Award ID: NA
                Funded by: Royal Society, doi 10.13039/501100000288;
                Award ID: URFR201019
                Funded by: Royal Society, doi 10.13039/501100000288;
                Award ID: UF140161
                Funded by: Royal Society, doi 10.13039/501100000288;
                Award ID: RGF�A180031
                Funded by: Royal Society, doi 10.13039/501100000288;
                Award ID: RG150444
                Funded by: Engineering and Physical Sciences Research Council, doi 10.13039/501100000266;
                Award ID: EP/T517811/1
                Funded by: Engineering and Physical Sciences Research Council, doi 10.13039/501100000266;
                Award ID: EP/S023232/1
                Funded by: Engineering and Physical Sciences Research Council, doi 10.13039/501100000266;
                Award ID: EP/L015838/1
                Categories
                Article
                Custom metadata
                jo3c00083
                jo3c00083

                Organic & Biomolecular chemistry
                Organic & Biomolecular chemistry

                Comments

                Comment on this article