12
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A liquid-filled D-shaped fiber (DF) cavity serving as an in-fiber Mach–Zehnder interferometer (MZI) has been proposed and experimentally demonstrated for temperature sensing with ultrahigh sensitivity. The miniature MZI is constructed by splicing a segment of DF between two single-mode fibers (SMFs) to form a microcavity (MC) for filling and replacement of various refractive index (RI) liquids. By adjusting the effective RI difference between the DF and MC (the two interference arms), experimental and calculated results indicate that the interference spectra show different degrees of temperature dependence. As the effective RI of the liquid-filled MC approaches that of the DF, temperature sensitivity up to −84.72 nm/°C with a linear correlation coefficient of 0.9953 has been experimentally achieved for a device with the MC length of 456 μm, filled with liquid RI of 1.482. Apart from ultrahigh sensitivity, the proposed MCMZI device possesses additional advantages of its miniature size and simple configuration; these features make it promising and competitive in various temperature sensing applications, such as consumer electronics, biological treatments, and medical diagnosis.

          Related collections

          Most cited references25

          • Record: found
          • Abstract: not found
          • Article: not found

          Review of the present status of optical fiber sensors

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Refractive index of air: new equations for the visible and near infrared.

            P Ciddor (1996)
            The precision of modern length interferometry and geodetic surveying far exceeds the accuracy, which is ultimately limited by the inadequacy of currently used equations for the refractive index of the atmosphere. I have critically reviewed recent research at the National Physical Laboratory, the International Bureau of Weights and Measures, and elsewhere that has led to revised formulas and data for the dispersion and density of the major components of the atmosphere. I have combined selected formulas from these sources to yield a set of equations that match recently reported measurements to within the experimental error, and that are expected to be reliable over very wide ranges of atmospheric parameters and wavelength.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Optical in-fibre grating high pressure sensor

                Bookmark

                Author and article information

                Journal
                Sensors (Basel)
                Sensors (Basel)
                sensors
                Sensors (Basel, Switzerland)
                MDPI
                1424-8220
                17 April 2018
                April 2018
                : 18
                : 4
                : 1239
                Affiliations
                [1 ]School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006, China; zh999em@ 123456163.com
                [2 ]Department of Electronic Engineering, College of Information Science and Technology, Jinan University, Guangzhou 510632, China; wallen-0407@ 123456163.com (L.W.); xchuang83@ 123456163.com (X.H.); huangbingsen@ 123456stu2016.jnu.edu.cn (B.H.); favinfeng@ 123456163.com (Y.F.); wpl@ 123456jnu.edu.cn (W.L.)
                [3 ]Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Jinan University, Guangzhou 510632, China; yunhanluo@ 123456163.com (Y.L.); thzhechen@ 123456163.com (Z.C.)
                [4 ]Institute of Photonics Technology, Jinan University, Guangzhou 510632, China; zhenshichan@ 123456gmail.com
                [5 ]State Key Laboratory of Optoelectronic Materials and Technologies and School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China; xiongsong1216@ 123456126.com (S.X.); tlzh88@ 123456jnu.edu.cn (Z.L.)
                Author notes
                [* ]Correspondence: gaosc825@ 123456163.com (S.G.); herofate@ 123456126.com (M.H.); Tel.: +86-020-8522-8267 (S.G.); +86-020-3932-2265 (M.H.)
                Author information
                https://orcid.org/0000-0003-4299-3760
                Article
                sensors-18-01239
                10.3390/s18041239
                5948719
                29673220
                f27201bd-0b0c-4416-a78c-714dd3ba7cd1
                © 2018 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 16 March 2018
                : 13 April 2018
                Categories
                Article

                Biomedical engineering
                micro-optical devices,fiber optics sensors,thermal effects
                Biomedical engineering
                micro-optical devices, fiber optics sensors, thermal effects

                Comments

                Comment on this article