1
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Triboelectric sensor with ultra-wide linear range based on water-containing elastomer and ion-rich interface

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The incompatibility of the high sensitivity and wide linear range still restricts the further development of active sensors. Here we report a triboelectric pressure sensor based on water-containing triboelectric elastomer with gradient-based microchannels. Tiny amount of liquid is injected into the triboelectric elastomer and the pressure-induced water bridges can modulate the built-in electric field of the sensor, which enhance the signal linearity near the compression limit. Moreover, it has been found that liquid-solid contact electrification can be enhanced by triggering selective ionic transfer, while the prepared ion-rich interface in the microchannels boosts the sensitivity of the sensor. Hence, an ultra-wide linear range (5 kPa–1240 kPa) with a sensitivity of 0.023 V kPa −1 can be achieved, which is so far the widest linear range of active sensors to our knowledge. Our work can promote the practical application of triboelectric sensors and provide new insights for other sensory devices.

          Abstract

          The incompatibility between high sensitivity and a wide linear range has hindered the development of sensors. Here, the authors propose a pressure sensor that combines a water-containing triboelectric elastomer with gradient-based microchannels, achieving an ultra-wide linear range and high sensitivity simultaneously.

          Related collections

          Most cited references47

          • Record: found
          • Abstract: found
          • Article: not found

          Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers.

          The development of an electronic skin is critical to the realization of artificial intelligence that comes into direct contact with humans, and to biomedical applications such as prosthetic skin. To mimic the tactile sensing properties of natural skin, large arrays of pixel pressure sensors on a flexible and stretchable substrate are required. We demonstrate flexible, capacitive pressure sensors with unprecedented sensitivity and very short response times that can be inexpensively fabricated over large areas by microstructuring of thin films of the biocompatible elastomer polydimethylsiloxane. The pressure sensitivity of the microstructured films far surpassed that exhibited by unstructured elastomeric films of similar thickness, and is tunable by using different microstructures. The microstructured films were integrated into organic field-effect transistors as the dielectric layer, forming a new type of active sensor device with similarly excellent sensitivity and response times.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Theoretical study of contact-mode triboelectric nanogenerators as an effective power source

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              25th anniversary article: The evolution of electronic skin (e-skin): a brief history, design considerations, and recent progress.

              Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
                Bookmark

                Author and article information

                Contributors
                chenxiangyu@binn.cas.cn
                Journal
                Nat Commun
                Nat Commun
                Nature Communications
                Nature Publishing Group UK (London )
                2041-1723
                6 December 2024
                6 December 2024
                2024
                : 15
                : 10640
                Affiliations
                [1 ]GRID grid.9227.e, ISNI 0000000119573309, Beijing Institute of Nanoenergy and Nanosystems, , Chinese Academy of Sciences, ; Beijing, China
                [2 ]School of Nanoscience and Engineering, University of Chinese Academy of Sciences, ( https://ror.org/05qbk4x57) Beijing, China
                [3 ]GRID grid.9227.e, ISNI 0000000119573309, National Center for Nanoscience and Technology, , Chinese Academy of Sciences, ; Beijing, China
                Author information
                http://orcid.org/0000-0001-6437-9150
                http://orcid.org/0000-0002-0711-0275
                Article
                54980
                10.1038/s41467-024-54980-x
                11624205
                39643620
                f1cdce76-49df-42aa-8cb4-ef038bee80fa
                © The Author(s) 2024

                Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.

                History
                : 3 June 2024
                : 23 November 2024
                Categories
                Article
                Custom metadata
                © Springer Nature Limited 2024

                Uncategorized
                electronic devices,devices for energy harvesting
                Uncategorized
                electronic devices, devices for energy harvesting

                Comments

                Comment on this article

                scite_
                5
                0
                0
                0
                Smart Citations
                5
                0
                0
                0
                Citing PublicationsSupportingMentioningContrasting
                View Citations

                See how this article has been cited at scite.ai

                scite shows how a scientific paper has been cited by providing the context of the citation, a classification describing whether it supports, mentions, or contrasts the cited claim, and a label indicating in which section the citation was made.

                Similar content720

                Most referenced authors631