Ultra high-sensitivity and tunable dual-band perfect absorber as a plasmonic sensor

We experimentally demonstrate a perfect plasmonic absorber at lambda = 1.6 microm. Its polarization-independent absorbance is 99% at normal incidence and remains very high over a wide angular range of incidence around +/-80 degrees. We introduce a novel concept to utilize this perfect absorber as plasmonic sensor for refractive index sensing. This sensing strategy offers great potential to maintain the performance of localized surface plasmon sensors even in nonlaboratory environments due to its simple and robust measurement scheme. Show more

We report the design, fabrication, and measurement of a microwave triple-band absorber. The compact single unit cell consists of three nested electric closed-ring resonators and a metallic ground plane separated by a dielectric layer. Simulation and experimental results show that the absorber has three distinctive absorption peaks at frequencies 4.06 GHz, 6.73 GHz, and 9.22 GHz with the absorption rates of 0.99, 0.93, and 0.95, respectively. The absorber is valid to a wide range of incident angles for both transverse electric (TE) and transverse magnetic (TM) polarizations. The triple-band absorber is a promising candidate as absorbing elements in scientific and technical applications because of its multiband absorption, polarization insensitivity, and wide-angle response. © 2011 Optical Society of America Show more

A perfect ultra-narrow band infrared metamaterial absorber based on the all-metal-grating structure is proposed. The absorber presents a perfect absorption efficiency of over 98% with an ultra-narrow bandwidth of 0.66 nm at normal incidence. This high efficient absorption is contributed to the surface plasmon resonance. Moreover, the surface plasmon resonance-induced strong surface electric field enhancement is favorable for application in biosensing system. When operated as a plasmonic refractive index sensor, the ultra-narrow band absorber has a wavelength sensitivity 2400 nm/RIU and an ultra-high figure of merit 3640, which are much better than those of most reported similar plasmonic sensors. Besides, we also comprehensively investigate the influences of structural parameters on the sensing properties. Due to the simplicity of its geometry structure and its easiness to be fabricated, the proposed high figure of merit and sensitivity sensor indicates a competitive candidate for applications in sensing or detecting fields. Show more