Experimental Study on Artificial Cemented Sand Prepared with Ordinary Portland Cement with Different Contents

Abstract

Artificial cemented sand test samples were prepared by using ordinary Portland cement (OPC) as the cementing agent. Through uniaxial compression tests and consolidated drained triaxial compression tests, the stress-strain curves of the artificial cemented sand with different cementing agent contents (0.01, 0.03, 0.05 and 0.08) under various confining pressures (0.00 MPa, 0.25 MPa, 0.50 MPa and 1.00 MPa) were obtained. Based on the test results, the effect of the cementing agent content ( C _v) on the physical and mechanical properties of the artificial cemented sand were analyzed and the Mohr-Coulomb strength theory was modified by using C _v. The research reveals that when C _v is high (e.g., C _v = 0.03, 0.05 or 0.08), the stress-strain curves of the samples indicate a strain softening behavior; under the same confining pressure, as C _v increases, both the peak strength and residual strength of the samples show a significant increase. When C _v is low (e.g., C _v = 0.01), the stress-strain curves of the samples indicate strain hardening behavior. From the test data, a function of C _v (the cementing agent content) with c′ (the cohesion force of the sample) and Δϕ′ (the increment of the angle of shearing resistance) is obtained. Furthermore, through modification of the Mohr-Coulomb strength theory, the effect of cementing agent content on the strength of the cemented sand is demonstrated.