18
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Triboelectric Nanogenerator Enabled Smart Shoes for Wearable Electricity Generation

      review-article
      , , , ,
      Research
      AAAS

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The parallel evolution of wearable electronics, artificial intelligence, and fifth-generation wireless technology has created a technological paradigm with the potential to change our lives profoundly. Despite this, addressing limitations linked to continuous, sustainable, and pervasive powering of wearable electronics remains a bottleneck to overcome in order to maximize the exponential benefit that these technologies can bring once synergized. A recent groundbreaking discovery has demonstrated that by using the coupling effect of contact electrification and electrostatic induction, triboelectric nanogenerators (TENGs) can efficiently convert irregular and low-frequency passive biomechanical energy from body movements into electrical energy, providing an infinite and sustainable power source for wearable electronics. A number of human motions have been exploited to properly and efficiently harness this energy potential, including human ambulation. Shoes are an indispensable component of daily wearing and can be leveraged as an excellent platform to exploit such kinetic energy. In this article, the latest representative achievements of TENG-based smart electricity-generating shoes are comprehensively reviewed. We summarize ways in which not only can biomechanical energy be scavenged via ambulatory motion, but also biomonitoring of health parameters via tracking of rhythm and strength of pace can be implemented to aid in theranostic fields. This work provides a systematical review of the rational structural design, practical applications, scenario analysis, and performance evaluation of TENG-based smart shoes for wearable electricity generation. In addition, the perspective for future development of smart electricity-generation shoes as a sustainable and pervasive energy solution towards the upcoming era of the Internet of Things is discussed.

          Related collections

          Most cited references176

          • Record: found
          • Abstract: found
          • Article: not found

          Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors

          A review on the principles, novel applications and perspectives of triboelectric nanogenerators as power sources and as self-powered sensors.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors.

            Zhong Wang (2013)
            Triboelectrification is an effect that is known to each and every one probably since ancient Greek time, but it is usually taken as a negative effect and is avoided in many technologies. We have recently invented a triboelectric nanogenerator (TENG) that is used to convert mechanical energy into electricity by a conjunction of triboelectrification and electrostatic induction. As for this power generation unit, in the inner circuit, a potential is created by the triboelectric effect due to the charge transfer between two thin organic/inorganic films that exhibit opposite tribo-polarity; in the outer circuit, electrons are driven to flow between two electrodes attached on the back sides of the films in order to balance the potential. Since the most useful materials for TENG are organic, it is also named organic nanogenerator, which is the first using organic materials for harvesting mechanical energy. In this paper, we review the fundamentals of the TENG in the three basic operation modes: vertical contact-separation mode, in-plane sliding mode, and single-electrode mode. Ever since the first report of the TENG in January 2012, the output power density of TENG has been improved 5 orders of magnitude within 12 months. The area power density reaches 313 W/m(2), volume density reaches 490 kW/m(3), and a conversion efficiency of ∼60% has been demonstrated. The TENG can be applied to harvest all kinds of mechanical energy that is available but wasted in our daily life, such as human motion, walking, vibration, mechanical triggering, rotating tire, wind, flowing water, and more. Alternatively, TENG can also be used as a self-powered sensor for actively detecting the static and dynamic processes arising from mechanical agitation using the voltage and current output signals of the TENG, respectively, with potential applications for touch pad and smart skin technologies. To enhance the performance of the TENG, besides the vast choices of materials in the triboelectric series, from polymer to metal and to fabric, the morphologies of their surfaces can be modified by physical techniques with the creation of pyramid-, square-, or hemisphere-based micro- or nanopatterns, which are effective for enhancing the contact area and possibly the triboelectrification. The surfaces of the materials can be functionalized chemically using various molecules, nanotubes, nanowires, or nanoparticles, in order to enhance the triboelectric effect. The contact materials can be composites, such as embedding nanoparticles in a polymer matrix, which may change not only the surface electrification but also the permittivity of the materials so that they can be effective for electrostatic induction. Therefore, there are numerous ways to enhance the performance of the TENG from the materials point of view. This gives an excellent opportunity for chemists and materials scientists to do extensive study both in the basic science and in practical applications. We anticipate that a better enhancement of the output power density will be achieved in the next few years. The TENG is possible not only for self-powered portable electronics but also as a new energy technology with potential to contribute to the world energy in the near future.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: found
              Is Open Access

              Quantifying the triboelectric series

              Triboelectrification is a well-known phenomenon that commonly occurs in nature and in our lives at any time and any place. Although each and every material exhibits triboelectrification, its quantification has not been standardized. A triboelectric series has been qualitatively ranked with regards to triboelectric polarization. Here, we introduce a universal standard method to quantify the triboelectric series for a wide range of polymers, establishing quantitative triboelectrification as a fundamental materials property. By measuring the tested materials with a liquid metal in an environment under well-defined conditions, the proposed method standardizes the experimental set up for uniformly quantifying the surface triboelectrification of general materials. The normalized triboelectric charge density is derived to reveal the intrinsic character of polymers for gaining or losing electrons. This quantitative triboelectric series may serve as a textbook standard for implementing the application of triboelectrification for energy harvesting and self-powered sensing.
                Bookmark

                Author and article information

                Contributors
                Journal
                Research (Wash D C)
                Research (Wash D C)
                RESEARCH
                Research
                AAAS
                2639-5274
                2020
                9 November 2020
                : 2020
                : 7158953
                Affiliations
                Department of Bioengineering, University of California, Los Angeles, Los Angeles, CA 90095, USA
                Author information
                https://orcid.org/0000-0003-3157-6902
                https://orcid.org/0000-0002-3439-0495
                Article
                10.34133/2020/7158953
                7877399
                33623909
                a88ecebc-9c00-4ac5-aa60-54759e600666
                Copyright © 2020 Yongjiu Zou et al.

                Exclusive Licensee Science and Technology Review Publishing House. Distributed under a Creative Commons Attribution License (CC BY 4.0).

                History
                : 27 July 2020
                : 24 August 2020
                Funding
                Funded by: 2020 Okawa Foundation Research Grant
                Funded by: Department of Bioengineering at the University of California, Los Angeles
                Funded by: Henry Samueli School of Engineering & Applied Science
                Categories
                Review Article

                Comments

                Comment on this article