Euphorbia polygonifolia extract assisted biosynthesis of Fe ₃ O ₄ @CuO nanoparticles: Applications in the removal of metronidazole, ciprofloxacin and cephalexin antibiotics from aqueous solutions under UV irradiation

Although antibiotics have been used in large quantities for some decades, until recently the existence of these substances in the environment has received little notice. It is only in recent years that a more complex investigation of antibiotic substances has been undertaken in order to permit an assessment of the environmental risks they may pose. Within the last decade an increasing number of studies covering antibiotic input, occurrence, fate and effects have been published, but there is still a lack of understanding and knowledge about antibiotics in the aquatic environment despite the numerous studies performed. This review addresses the present state of knowledge concerning the input, occurrence, fate and effects of antibiotics in the environment. It brings up important questions that are still open, and addresses some significant issues which must be tackled in the future for a better understanding of the behavior of antibiotics in the environment, as well as the risks associated with their occurrence. Questions related to resistance in the environment that may be caused by antibiotics will be addressed in the second part. Show more

Urban wastewater treatment plants (UWTPs) are among the main sources of antibiotics' release into various compartments of the environment worldwide. The aim of the present paper is to critically review the fate and removal of various antibiotics in wastewater treatment, focusing on different processes (i.e. biological processes, advanced treatment technologies and disinfection) in view of the current concerns related to the induction of toxic effects in aquatic and terrestrial organisms, and the occurrence of antibiotics that may promote the selection of antibiotic resistance genes and bacteria, as reported in the literature. Where available, estimations of the removal of antibiotics are provided along with the main treatment steps. The removal efficiency during wastewater treatment processes varies and is mainly dependent on a combination of antibiotics' physicochemical properties and the operating conditions of the treatment systems. As a result, the application of alternative techniques including membrane processes, activated carbon adsorption, advanced oxidation processes (AOPs), and combinations of them, which may lead to higher removals, may be necessary before the final disposal of the effluents or their reuse for irrigation or groundwater recharge. Copyright © 2012 Elsevier Ltd. All rights reserved. Show more

An array of physical, chemical and biological methods have been used to synthesize nanomaterials. In order to synthesize noble metal nanoparticles of particular shape and size specific methodologies have been formulated. Although ultraviolet irradiation, aerosol technologies, lithography, laser ablation, ultrasonic fields, and photochemical reduction techniques have been used successfully to produce nanoparticles, they remain expensive and involve the use of hazardous chemicals. Therefore, there is a growing concern to develop environment-friendly and sustainable methods. Since the synthesis of nanoparticles of different compositions, sizes, shapes and controlled dispersity is an important aspect of nanotechnology new cost-effective procedures are being developed. Microbial synthesis of nanoparticles is a green chemistry approach that interconnects nanotechnology and microbial biotechnology. Biosynthesis of gold, silver, gold-silver alloy, selenium, tellurium, platinum, palladium, silica, titania, zirconia, quantum dots, magnetite and uraninite nanoparticles by bacteria, actinomycetes, fungi, yeasts and viruses have been reported. However, despite the stability, biological nanoparticles are not monodispersed and the rate of synthesis is slow. To overcome these problems, several factors such as microbial cultivation methods and the extraction techniques have to be optimized and the combinatorial approach such as photobiological methods may be used. Cellular, biochemical and molecular mechanisms that mediate the synthesis of biological nanoparticles should be studied in detail to increase the rate of synthesis and improve properties of nanoparticles. Owing to the rich biodiversity of microbes, their potential as biological materials for nanoparticle synthesis is yet to be fully explored. In this review, we present the current status of microbial synthesis and applications of metal nanoparticles. Copyright 2010 Elsevier B.V. All rights reserved. Show more