11
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Exsolution trends and co-segregation aspects of self-grown catalyst nanoparticles in perovskites

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          In perovskites, exsolution of transition metals has been proposed as a smart catalyst design for energy applications. Although there exist transition metals with superior catalytic activity, they are limited by their ability to exsolve under a reducing environment. When a doping element is present in the perovskite, it is often observed that the surface segregation of the doping element is changed by oxygen vacancies. However, the mechanism of co-segregation of doping element with oxygen vacancies is still an open question. Here we report trends in the exsolution of transition metal (Mn, Co, Ni and Fe) on the PrBaMn 2O 5+ δ layered perovskite oxide related to the co-segregation energy. Transmission electron microscopic observations show that easily reducible cations (Mn, Co and Ni) are exsolved from the perovskite depending on the transition metal-perovskite reducibility. In addition, using density functional calculations we reveal that co-segregation of B-site dopant and oxygen vacancies plays a central role in the exsolution.

          Abstract

          Exsolution of transition metals from perovskites provides an effective route to useful catalysts, but the underlying factors governing exsolution remain poorly understood. Here, the authors find trends in exsolution in layered perovskites, showing that co-segregation of B-site dopant and oxygen vacancies plays a central role.

          Related collections

          Most cited references32

          • Record: found
          • Abstract: found
          • Article: not found

          In situ growth of nanoparticles through control of non-stoichiometry.

          Surfaces decorated with uniformly dispersed catalytically active nanoparticles play a key role in many fields, including renewable energy and catalysis. Typically, these structures are prepared by deposition techniques, but alternatively they could be made by growing the nanoparticles in situ directly from the (porous) backbone support. Here we demonstrate that growing nano-size phases from perovskites can be controlled through judicious choice of composition, particularly by tuning deviations from the ideal ABO3 stoichiometry. This non-stoichiometry facilitates a change in equilibrium position to make particle exsolution much more dynamic, enabling the preparation of compositionally diverse nanoparticles (that is, metallic, oxides or mixtures) and seems to afford unprecedented control over particle size, distribution and surface anchorage. The phenomenon is also shown to be influenced strongly by surface reorganization characteristics. The concept exemplified here may serve in the design and development of more sophisticated oxide materials with advanced functionality across a range of possible domains of application.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: found
            Is Open Access

            Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution

            Metal particles supported on oxide surfaces are used as catalysts for a wide variety of processes in the chemical and energy conversion industries. For catalytic applications, metal particles are generally formed on an oxide support by physical or chemical deposition, or less commonly by exsolution from it. Although fundamentally different, both methods might be assumed to produce morphologically and functionally similar particles. Here we show that unlike nickel particles deposited on perovskite oxides, exsolved analogues are socketed into the parent perovskite, leading to enhanced stability and a significant decrease in the propensity for hydrocarbon coking, indicative of a stronger metal–oxide interface. In addition, we reveal key surface effects and defect interactions critical for future design of exsolution-based perovskite materials for catalytic and other functionalities. This study provides a new dimension for tailoring particle–substrate interactions in the context of increasing interest for emergent interfacial phenomena.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells.

              Different layered perovskite-related oxides are known to exhibit important electronic, magnetic and electrochemical properties. Owing to their excellent mixed-ionic and electronic conductivity and fast oxygen kinetics, cation layered double perovskite oxides such as PrBaCo2O5 in particular have exhibited excellent properties as solid oxide fuel cell oxygen electrodes. Here, we show for the first time that related layered materials can be used as high-performance fuel electrodes. Good redox stability with tolerance to coking and sulphur contamination from hydrocarbon fuels is demonstrated for the layered perovskite anode PrBaMn2O5+δ (PBMO). The PBMO anode is fabricated by in situ annealing of Pr0.5Ba0.5MnO3-δ in fuel conditions and actual fuel cell operation is demonstrated. At 800 °C, layered PBMO shows high electrical conductivity of 8.16 S cm(-1) in 5% H2 and demonstrates peak power densities of 1.7 and 1.3 W cm(-2) at 850 °C using humidified hydrogen and propane fuels, respectively.
                Bookmark

                Author and article information

                Journal
                Nat Commun
                Nat Commun
                Nature Communications
                Nature Publishing Group
                2041-1723
                28 June 2017
                2017
                : 8
                : 15967
                Affiliations
                [1 ]Department of Energy Engineering, Ulsan National Institute of Science and Technology (UNIST) , Ulsan 44919, Republic of Korea
                [2 ]Department of Chemical Engineering, University of Seoul , Seoul 02504, Republic of Korea
                [3 ]UNIST Central Research Facilities and School of Materials Science and Engineering, UNIST , Ulsan 44919, Republic of Korea
                [4 ]Division of Mechanical Systems Engineering, Sookmyung Women’s University , Seoul 04310, Republic of Korea
                [5 ]Department of Chemical Engineering, Wonkwang University , Iksan 54538, Republic of Korea
                Author notes
                [*]

                These authors contributed equally to this work.

                Author information
                http://orcid.org/0000-0003-1297-6038
                http://orcid.org/0000-0001-5676-5844
                Article
                ncomms15967
                10.1038/ncomms15967
                5493762
                28656965
                215e7aae-5d7b-411b-95df-4168394f6005
                Copyright © 2017, The Author(s)

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

                History
                : 26 November 2016
                : 16 May 2017
                Categories
                Article

                Uncategorized
                Uncategorized

                Comments

                Comment on this article