26
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Glucose recovery from aqueous solutions by adsorption in metal–organic framework MIL-101: a molecular simulation study

      research-article
      1 , 1 , a , 1
      Scientific Reports
      Nature Publishing Group

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A molecular simulation study is reported on glucose recovery from aqueous solutions by adsorption in metal-organic framework MIL-101. The F atom of MIL-101 is identified to be the most favorable adsorption site. Among three MIL-101-X (X = H, NH 2 or CH 3), the parent MIL-101 exhibits the highest adsorption capacity and recovery efficacy. Upon functionalization by -NH 2 or -CH 3 group, the steric hindrance in MIL-101 increases; consequently, the interactions between glucose and framework become less attractive, thus reducing the capacity and mobility of glucose. The presence of ionic liquid, 1-ethyl-3-methyl-imidazolium acetate, as an impurity reduces the strength of hydrogen-bonding between glucose and MIL-101, and leads to lower capacity and mobility. Upon adding anti-solvent (ethanol or acetone), a similar adverse effect is observed. The simulation study provides useful structural and dynamic properties of glucose in MIL-101, and it suggests that MIL-101 might be a potential candidate for glucose recovery.

          Related collections

          Most cited references10

          • Record: found
          • Abstract: found
          • Article: not found

          Applications of ionic liquids in the chemical industry.

          In contrast to a recently expressed, and widely cited, view that "Ionic liquids are starting to leave academic labs and find their way into a wide variety of industrial applications", we demonstrate in this critical review that there have been parallel and collaborative exchanges between academic research and industrial developments since the materials were first reported in 1914 (148 references).
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Furfural--a promising platform for lignocellulosic biofuels.

            Furfural offers a promising, rich platform for lignocellulosic biofuels. These include methylfuran and methyltetrahydrofuran, valerate esters, ethylfurfuryl and ethyltetrahydrofurfuryl ethers as well as various C(10)-C(15) coupling products. The various production routes are critically reviewed, and the needs for improvements are identified. Their relative industrial potential is analysed by defining an investment index and CO(2) emissions as well as determining the fuel properties for the resulting products. Finally, the most promising candidate, 2-methylfuran, was subjected to a road trial of 90,000 km in a gasoline blend. Importantly, the potential of the furfural platform relies heavily on the cost-competitive production of furfural from lignocellulosic feedstock. Conventional standalone and emerging coproduct processes-for example, as a coproduct of cellulosic ethanol, levulinic acid or hydroxymethyl furfural-are expensive and energetically demanding. Challenges and areas that need improvement are highlighted. In addition to providing a critical review of the literature, this paper also presents new results and analysis in this area.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Catalytic conversion of biomass to monofunctional hydrocarbons and targeted liquid-fuel classes.

              It is imperative to develop more efficient processes for conversion of biomass to liquid fuels, such that the cost of these fuels would be competitive with the cost of fuels derived from petroleum. We report a catalytic approach for the conversion of carbohydrates to specific classes of hydrocarbons for use as liquid transportation fuels, based on the integration of several flow reactors operated in a cascade mode, where the effluent from the one reactor is simply fed to the next reactor. This approach can be tuned for production of branched hydrocarbons and aromatic compounds in gasoline, or longer-chain, less highly branched hydrocarbons in diesel and jet fuels. The liquid organic effluent from the first flow reactor contains monofunctional compounds, such as alcohols, ketones, carboxylic acids, and heterocycles, that can also be used to provide reactive intermediates for fine chemicals and polymers markets.
                Bookmark

                Author and article information

                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group
                2045-2322
                05 August 2015
                2015
                : 5
                : 12821
                Affiliations
                [1 ]Department of Chemical and Biomolecular Engineering, National University of Singapore , 117576, Singapore
                Author notes
                Article
                srep12821
                10.1038/srep12821
                4525290
                26242874
                0c50c37b-f4d3-4dd8-85e7-540e9830df53
                Copyright © 2015, Macmillan Publishers Limited

                This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

                History
                : 09 April 2015
                : 10 July 2015
                Categories
                Article

                Uncategorized
                Uncategorized

                Comments

                Comment on this article