9
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Recent Advances of Point-of-Care Devices Integrated with Molecularly Imprinted Polymers-Based Biosensors: From Biomolecule Sensing Design to Intraoral Fluid Testing

      , , , , ,
      Biosensors
      MDPI AG

      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Recent developments of point-of-care testing (POCT) and in vitro diagnostic medical devices have provided analytical capabilities and reliable diagnostic results for rapid access at or near the patient’s location. Nevertheless, the challenges of reliable diagnosis still remain an important factor in actual clinical trials before on-site medical treatment and making clinical decisions. New classes of POCT devices depict precise diagnostic technologies that can detect biomarkers in biofluids such as sweat, tears, saliva or urine. The introduction of a novel molecularly imprinted polymer (MIP) system as an artificial bioreceptor for the POCT devices could be one of the emerging candidates to improve the analytical performance along with physicochemical stability when used in harsh environments. Here, we review the potential availability of MIP-based biorecognition systems as custom artificial receptors with high selectivity and chemical affinity for specific molecules. Further developments to the progress of advanced MIP technology for biomolecule recognition are introduced. Finally, to improve the POCT-based diagnostic system, we summarized the perspectives for high expandability to MIP-based periodontal diagnosis and the future directions of MIP-based biosensors as a wearable format.

          Related collections

          Most cited references161

          • Record: found
          • Abstract: found
          • Article: not found

          Enteric involvement of coronaviruses: is faecal–oral transmission of SARS-CoV-2 possible?

          The end of 2019 was marked by the emergence of a novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which caused an outbreak of viral pneumonia (COVID-19) in Wuhan, China. At the time of writing, SARS-CoV-2, previously known as 2019-nCoV, has spread to more than 26 countries around the world. According to the WHO COVID-19 situation report-28 released on Feb 17, 2020, more than 71 000 cases have been confirmed and at least 1770 deaths. Coronaviruses are a family of single-stranded enveloped RNA viruses that are divided into four major genera. The genome sequence of SARS-CoV-2 is 82% similar to severe acute respiratory syndrome coronavirus (SARS-CoV), 1 and both belong to the β-genus of the coronavirus family. 2 Human coronaviruses such as SARS-CoV and Middle East respiratory syndrome coronavirus (MERS-CoV), are known to cause respiratory and enteric symptoms. In the SARS outbreak of 2002–03, 16–73% of patients with SARS had diarrhoea during the course of the disease, usually within the first week of illness. 3 SARS-CoV RNA was only detected in stools from the fifth day of illness onwards, and the proportion of stool specimens positive for viral RNA progressively increased and peaked at day 11 of the illness, with viral RNA still present in the faeces of a small proportion of patients even after 30 days of illness. 4 The mechanism for gastrointestinal tract infection of SARS-CoV is proposed to be the angiotensin-converting enzyme 2 (ACE2) cell receptor. 2 In the initial MERS-CoV outbreak in 2012, a quarter of patients with MERS-CoV reported gastrointestinal symptoms such as diarrhoea or abdominal pain at presentation. 5 Some patients initially presented with both fever and gastrointestinal symptoms before subsequent manifestation of more severe respiratory symptoms. 6 Corman and colleagues 7 found MERS-CoV RNA in 14·6% of stool samples from patients with MERS-CoV. In-vitro studies have shown that MERS-CoV can infect and replicate in human primary intestinal epithelial cells, potentially via the dipeptidyl peptidase 4 receptor. 8 In-vivo studies showed inflammation and epithelial degeneration in the small intestines, with subsequent development of pneumonia and brain infection. 8 These results suggest that MERS-CoV pulmonary infection was secondary to the intestinal infection. In early reports from Wuhan, 2–10% of patients with COVID-19 had gastrointestinal symptoms such as diarrhoea, abdominal pain, and vomiting.9, 10 Abdominal pain was reported more frequently in patients admitted to the intensive care unit than in individuals who did not require intensive care unit care, and 10% of patients presented with diarrhoea and nausea 1–2 days before the development of fever and respiratory symptoms. 9 SARS-CoV-2 RNA has been detected in the stool of a patient in the USA. 11 The binding affinity of ACE2 receptors is one of the most important determinants of infectivity, and structural analyses predict that SARS-CoV-2 not only uses ACE2 as its host receptor, but uses human ACE2 more efficiently than the 2003 strain of SARS-CoV (although less efficiently than the 2002 strain). 2 Data exist to support the notion that SARS-CoV and MERS-CoV are viable in environmental conditions that could facilitate faecal–oral transmission. SARS-CoV RNA was found in the sewage water of two hospitals in Beijing treating patients with SARS. 12 When SARS-CoV was seeded into sewage water obtained from the hospitals in a separate experiment, the virus was found to remain infectious for 14 days at 4°C, but for only 2 days at 20°C. 12 SARS-CoV can survive for up to 2 weeks after drying, remaining viable for up to 5 days at temperatures of 22–25°C and 40–50% relative humidity, with a gradual decline in virus infectivity thereafter. 13 Viability of the SARS-CoV virus decreased after 24 h at 38°C and 80–90% relative humidity. 13 MERS-CoV is viable in low temperature, low humidity conditions. The virus was viable on different surfaces for 48 h at 20°C and 40% relative humidity, although viability decreased to 8 h at 30°C and 80% relative humidity conditions. 14 At present, no viability data are available for SARS-CoV-2. The viability of SARS-CoV and MERS-CoV under various conditions and their prolonged presence in the environment suggest the potential for coronaviruses to be transmitted via contact or fomites. SARS-CoV and MERS-CoV are both viable in conditions with low temperatures and humidity.12, 13, 14 Although direct droplet transmission is an important route of transmission, faecal excretion, environmental contamination, and fomites might contribute to viral transmission. Considering the evidence of faecal excretion for both SARS-CoV and MERS-CoV, and their ability to remain viable in conditions that could facilitate faecal–oral transmission, it is possible that SARS-CoV-2 could also be transmitted via this route. The possibility of faecal–oral transmission of SARS-CoV-2 has implications, especially in areas with poor sanitation. Coronaviruses are susceptible to antiseptics containing ethanol, and disinfectants containing chlorine or bleach. 15 Strict precautions must be observed when handling the stools of patients infected with coronavirus, and sewage from hospitals should also be properly disinfected. The importance of frequent and proper hand hygiene should be emphasised. Future research on the possibility of faecal–oral transmission of SARS-CoV-2 should include environmental studies to determine whether the virus remains viable in conditions that would favour such transmission. Study of the enteric involvement and viral excretion of SARS-CoV-2 in faeces is required to investigate whether faecal concentrations of SARS-CoV-2 RNA correlate with the severity of the disease and presence or absence of gastrointestinal symptoms, and whether faecal SARS-CoV-2 RNA can also be detected in the incubation or convalescence phases of COVID-19. © 2020 NIAID-RML/National Institutes of Health/Science Photo Library 2020 Since January 2020 Elsevier has created a COVID-19 resource centre with free information in English and Mandarin on the novel coronavirus COVID-19. The COVID-19 resource centre is hosted on Elsevier Connect, the company's public news and information website. Elsevier hereby grants permission to make all its COVID-19-related research that is available on the COVID-19 resource centre - including this research content - immediately available in PubMed Central and other publicly funded repositories, such as the WHO COVID database with rights for unrestricted research re-use and analyses in any form or by any means with acknowledgement of the original source. These permissions are granted for free by Elsevier for as long as the COVID-19 resource centre remains active.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat

            Wearable sweat sensors have the potential to provide continuous measurements of useful biomarkers. However, current sensors cannot accurately detect low analyte concentrations, lack multimodal sensing or are difficult to fabricate at large scale. We report an entirely laser-engraved sensor for simultaneous sweat sampling, chemical sensing and vital-sign monitoring. We demonstrate continuous detection of temperature, respiration rate and low concentrations of uric acid and tyrosine, analytes associated with diseases such as gout and metabolic disorders. We test the performance of the device in both physically trained and untrained subjects under exercise and after a protein-rich diet. We also evaluate its utility for gout monitoring in patients and healthy controls through a purine-rich meal challenge. Levels of uric acid in sweat were higher in patients with gout than in healthy individuals, and a similar trend was observed in serum.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: found
              Is Open Access

              Wearable smart sensor systems integrated on soft contact lenses for wireless ocular diagnostics

              Wearable contact lenses which can monitor physiological parameters have attracted substantial interests due to the capability of direct detection of biomarkers contained in body fluids. However, previously reported contact lens sensors can only monitor a single analyte at a time. Furthermore, such ocular contact lenses generally obstruct the field of vision of the subject. Here, we developed a multifunctional contact lens sensor that alleviates some of these limitations since it was developed on an actual ocular contact lens. It was also designed to monitor glucose within tears, as well as intraocular pressure using the resistance and capacitance of the electronic device. Furthermore, in-vivo and in-vitro tests using a live rabbit and bovine eyeball demonstrated its reliable operation. Our developed contact lens sensor can measure the glucose level in tear fluid and intraocular pressure simultaneously but yet independently based on different electrical responses.
                Bookmark

                Author and article information

                Contributors
                Journal
                BIOSHU
                Biosensors
                Biosensors
                MDPI AG
                2079-6374
                March 2022
                February 22 2022
                : 12
                : 3
                : 136
                Article
                10.3390/bios12030136
                003a5498-821c-400d-8ddf-3dc297de227d
                © 2022

                https://creativecommons.org/licenses/by/4.0/

                History

                Comments

                Comment on this article