Perspective on near-field radiative heat transfer

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Although near-field radiative heat transfer was introduced in the 1950s, interest in the field has only recently revived, as the effect promises improved performance in various applications where contactless temperature regulation in the small-scale is a requirement. With progress in computational electromagnetics as well as in nanoinstrumentation, it has become possible to simulate the effect in complex configurations and to measure it with high precision. In this Perspective, we highlight key theoretical and experimental advances in the field, and we discuss important developments in tailoring and enhancing near-field thermal emission and heat transfer. We discuss opportunities in heat-to-electricity energy conversion with thermophotovoltaic systems, as well as non-reciprocal heat transfer, as two of many recent focus topics in the field. Finally, we highlight key experimental challenges and opportunities with emerging materials, for probing near-field heat transfer for relevant technologies in the large-scale.

Related collections

Most cited references 187

Record: found
Abstract: not found
Article: not found

Detailed Balance Limit of Efficiency of p-n Junction Solar Cells

William Shockley, Hans Queisser (1961)

0 comments Cited 1124 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Passive radiative cooling below ambient air temperature under direct sunlight.

Aaswath P Raman, Marc Abou Anoma, Linxiao Zhu … (2014)

Cooling is a significant end-use of energy globally and a major driver of peak electricity demand. Air conditioning, for example, accounts for nearly fifteen per cent of the primary energy used by buildings in the United States. A passive cooling strategy that cools without any electricity input could therefore have a significant impact on global energy consumption. To achieve cooling one needs to be able to reach and maintain a temperature below that of the ambient air. At night, passive cooling below ambient air temperature has been demonstrated using a technique known as radiative cooling, in which a device exposed to the sky is used to radiate heat to outer space through a transparency window in the atmosphere between 8 and 13 micrometres. Peak cooling demand, however, occurs during the daytime. Daytime radiative cooling to a temperature below ambient of a surface under direct sunlight has not been achieved because sky access during the day results in heating of the radiative cooler by the Sun. Here, we experimentally demonstrate radiative cooling to nearly 5 degrees Celsius below the ambient air temperature under direct sunlight. Using a thermal photonic approach, we introduce an integrated photonic solar reflector and thermal emitter consisting of seven layers of HfO2 and SiO2 that reflects 97 per cent of incident sunlight while emitting strongly and selectively in the atmospheric transparency window. When exposed to direct sunlight exceeding 850 watts per square metre on a rooftop, the photonic radiative cooler cools to 4.9 degrees Celsius below ambient air temperature, and has a cooling power of 40.1 watts per square metre at ambient air temperature. These results demonstrate that a tailored, photonic approach can fundamentally enable new technological possibilities for energy efficiency. Further, the cold darkness of the Universe can be used as a renewable thermodynamic resource, even during the hottest hours of the day.