A Review of MOFs and Their Composites‐Based Photocatalysts: Synthesis and Applications

The production of hydrogen from water using a catalyst and solar energy is an ideal future energy source, independent of fossil reserves. For an economical use of water and solar energy, catalysts that are sufficiently efficient, stable, inexpensive and capable of harvesting light are required. Here, we show that an abundant material, polymeric carbon nitride, can produce hydrogen from water under visible-light irradiation in the presence of a sacrificial donor. Contrary to other conducting polymer semiconductors, carbon nitride is chemically and thermally stable and does not rely on complicated device manufacturing. The results represent an important first step towards photosynthesis in general where artificial conjugated polymer semiconductors can be used as energy transducers.

Catalytically competent Ir, Re, and Ru complexes H(2)L(1)-H(2)L(6) with dicarboxylic acid functionalities were incorporated into a highly stable and porous Zr(6)O(4)(OH)(4)(bpdc)(6) (UiO-67, bpdc = para-biphenyldicarboxylic acid) framework using a mix-and-match synthetic strategy. The matching ligand lengths between bpdc and L(1)-L(6) ligands allowed the construction of highly crystalline UiO-67 frameworks (metal-organic frameworks (MOFs) 1-6) that were doped with L(1)-L(6) ligands. MOFs 1-6 were isostructural to the parent UiO-67 framework as shown by powder X-ray diffraction (PXRD) and exhibited high surface areas ranging from 1092 to 1497 m(2)/g. MOFs 1-6 were stable in air up to 400 °C and active catalysts in a range of reactions that are relevant to solar energy utilization. MOFs 1-3 containing [Cp*Ir(III)(dcppy)Cl] (H(2)L(1)), [Cp*Ir(III)(dcbpy)Cl]Cl (H(2)L(2)), and [Ir(III)(dcppy)(2)(H(2)O)(2)]OTf (H(2)L(3)) (where Cp* is pentamethylcyclopentadienyl, dcppy is 2-phenylpyridine-5,4'-dicarboxylic acid, and dcbpy is 2,2'-bipyridine-5,5'-dicarboxylic acid) were effective water oxidation catalysts (WOCs), with turnover frequencies (TOFs) of up to 4.8 h(-1). The [Re(I)(CO)(3)(dcbpy)Cl] (H(2)L(4)) derivatized MOF 4 served as an active catalyst for photocatalytic CO(2) reduction with a total turnover number (TON) of 10.9, three times higher than that of the homogeneous complex H(2)L(4). MOFs 5 and 6 contained phosphorescent [Ir(III)(ppy)(2)(dcbpy)]Cl (H(2)L(5)) and [Ru(II)(bpy)(2)(dcbpy)]Cl(2) (H(2)L(6)) (where ppy is 2-phenylpyridine and bpy is 2,2'-bipyridine) and were used in three photocatalytic organic transformations (aza-Henry reaction, aerobic amine coupling, and aerobic oxidation of thioanisole) with very high activities. The inactivity of the parent UiO-67 framework and the reaction supernatants in catalytic water oxidation, CO(2) reduction, and organic transformations indicate both the molecular origin and heterogeneous nature of these catalytic processes. The stability of the doped UiO-67 catalysts under catalytic conditions was also demonstrated by comparing PXRD patterns before and after catalysis. This work illustrates the potential of combining molecular catalysts and MOF structures in developing highly active heterogeneous catalysts for solar energy utilization.

The morphology and composition design of MOF-derived carbon-based materials and their applications for electrocatalytic ORR, OER and HER are reviewed. Oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are three key reactions for the development of green and sustainable energy systems. Efficient electrocatalysts for these reactions are highly desired to lower their overpotentials and promote practical applications of related energy devices. Metal–organic frameworks (MOFs) have recently emerged as precursors to fabricate carbon-based electrocatalysts with high electrical conductivity and uniformly distributed active sites. In this review, the current progress of MOF-derived carbon-based materials for ORR/OER/HER electrocatalysis is presented. Materials design strategies of MOF-derived carbon-based materials are firstly summarized to show the rich possibilities of the morphology and composition of MOF-derived carbon-based materials. A wide range of applications based on these materials for ORR, OER, HER and multifunctional electrocatalysis are discussed, with an emphasis on the required features of MOF-derived carbon-based materials for the electrocatalysis of corresponding reactions. Finally, perspectives on the development of MOF-derived carbon-based materials for ORR, OER and HER electrocatalysis are provided.