RESUMO As atividades industriais têm contribuído com a geração de resíduos de gesso, logo o alto volume e a destinação inapropriada contribuem com os problemas ambientais, além de representar desperdício de material na construção civil. O objetivo do trabalho foi caracterizar o resíduo de gesso e avaliar a influência de parâmetros como granulometria, temperatura e tempo de calcinação nas propriedades do gesso reciclado, buscando a redução dos resíduos e obtenção de melhores propriedades do produto final com a utilização de 100% de gesso reciclado. O resíduo de gesso foi beneficiado, caracterizado e separado em três diferentes granulometrias: peneira ABNT nº 200 (0,075 mm); ASTM nº 50 (0,3 mm) e ABNT nº 10 (2,0 mm). Em seguida calcinados nas temperaturas de 130, 136, 150 e 170ºC durante 1, 2, 4, 6, 8, 17 e 24h. Foi analisada no gesso reciclado a sua trabalhabilidade, calor de hidratação, propriedades mecânicas, caracterização mineralógica e morfologia. O gesso reciclado teve influência nas suas propriedades nos parâmetros avaliados, além da presença de impurezas. As principais fases formadas no gesso reciclado foram afetadas pelo tempo de calcinação: o sulfato de cálcio hemihidratado, sulfato de cálcio dihidratado, anidrita e calcita. A trabalhabilidade não mostrou uma tendência clara de comportamento independente da granulometria, tempo e temperatura de calcinação. Os melhores resultados para a resistência compressão foram obtidos na temperatura de 136ºC (17h) e 150ºC (8h). O gesso reciclado apresentou uma dureza média de 12,71N·mm-². A reciclagem do resíduo de gesso pode contribuir com a redução dos resíduos e possibilitar na construção civil a utilização de novas tecnologias.
ABSTRACT Industrial activities have contributed to the generation of gypsum waste, so the high volume and inappropriate disposal contributes to environmental problems and represents waste of material. The objective of this work was to characterize the waste of gypsum and to evaluate the influence of parameters such as granulometry, temperature and calcination time on the properties of the recycled gypsum, seeking the reduction of residues and obtaining better properties of the final product with the use of 100% of recycled plaster. The gypsum waste was beneficiated, characterized and separated into three different granulometries: sieve ABNT nº 200 (0.075 mm); ASTM nº 50 (0.3 mm) and ABNT nº 10 (2.0 mm). They were then calcined at temperatures of 130, 136, 150 and 170ºC for 1, 2, 4, 6, 8, 17 and 24h. Its workability, heat of hydration, mechanical properties, mineralogical characterization and morphology were analyzed in the recycled plaster. The recycled gypsum was influenced in its properties in the evaluated parameters, besides the presence of impurities. The main phases formed in the recycled gypsum were affected by the calcination time: calcium sulfate hemihydrate, calcium sulfate dihydrate, anhydrite and calcite. The workability did not show a clear trend of behavior independent of grain size, time and calcination temperature. The best results for the compressive strength were obtained at the temperature of 136ºC (17h) and 150ºC (8h). The recycled plaster had an average hardness of 12.71 N·mm-2. The recycling of gypsum waste can contribute to the reduction of waste and make possible the use of new technologies in civil construction.