Cerium(IV)-Driven Water Oxidation Catalyzed by a Manganese(V)-Nitrido Complex

To convert the energy of sunlight into chemical energy, the leaf splits water via the photosynthetic process to produce molecular oxygen and hydrogen, which is in a form of separated protons and electrons. The primary steps of natural photosynthesis involve the absorption of sunlight and its conversion into spatially separated electron-hole pairs. The holes of this wireless current are captured by the oxygen evolving complex (OEC) of photosystem II (PSII) to oxidize water to oxygen. The electrons and protons produced as a byproduct of the OEC reaction are captured by ferrodoxin of photosystem I. With the aid of ferrodoxin-NADP(+) reductase, they are used to produce hydrogen in the form of NADPH. For a synthetic material to realize the solar energy conversion function of the leaf, the light-absorbing material must capture a solar photon to generate a wireless current that is harnessed by catalysts, which drive the four electron/hole fuel-forming water-splitting reaction under benign conditions and under 1 sun (100 mW/cm(2)) illumination. This Account describes the construction of an artificial leaf comprising earth-abundant elements by interfacing a triple junction, amorphous silicon photovoltaic with hydrogen- and oxygen-evolving catalysts made from a ternary alloy (NiMoZn) and a cobalt-phosphate cluster (Co-OEC), respectively. The latter captures the structural and functional attributes of the PSII-OEC. Similar to the PSII-OEC, the Co-OEC self-assembles upon oxidation of an earth-abundant metal ion from 2+ to 3+, may operate in natural water at room temperature, and is self-healing. The Co-OEC also activates H(2)O by a proton-coupled electron transfer mechanism in which the Co-OEC is increased by four hole equivalents akin to the S-state pumping of the Kok cycle of PSII. X-ray absorption spectroscopy studies have established that the Co-OEC is a structural relative of Mn(3)CaO(4)-Mn cubane of the PSII-OEC, where Co replaces Mn and the cubane is extended in a corner-sharing, head-to-tail dimer. The ability to perform the oxygen-evolving reaction in water at neutral or near-neutral conditions has several consequences for the construction of the artificial leaf. The NiMoZn alloy may be used in place of Pt to generate hydrogen. To stabilize silicon in water, its surface is coated with a conducting metal oxide onto which the Co-OEC may be deposited. The net result is that immersing a triple-junction Si wafer coated with NiMoZn and Co-OEC in water and holding it up to sunlight can effect direct solar energy conversion via water splitting. By constructing a simple, stand-alone device composed of earth-abundant materials, the artificial leaf provides a means for an inexpensive and highly distributed solar-to-fuels system that employs low-cost systems engineering and manufacturing. Through this type of system, solar energy can become a viable energy supply to those in the non-legacy world.

Hydrogen is the most promising fuel of the future owing to its carbon-free, high-energy content and potential to be efficiently converted into either electrical or thermal energy. The greatest technical barrier to accessing this renewable resource remains the inability to create inexpensive catalysts for the solar-driven oxidation of water. To date, the most efficient system that uses solar energy to oxidize water is the photosystem II water-oxidizing complex (PSII-WOC), which is found within naturally occurring photosynthetic organisms. The catalytic core of this enzyme is a CaMn(4)O(x) cluster, which is present in all known species of oxygenic phototrophs and has been conserved since the emergence of this type of photosynthesis about 2.5 billion years ago. The key features that facilitate the catalytic success of the PSII-WOC offer important lessons for the design of abiological water oxidation catalysts. In this Account, we examine the chemical principles that may govern the PSII-WOC by comparing the water oxidation capabilities of structurally related synthetic manganese-oxo complexes, particularly those with a cubical Mn(4)O(4) core ("cubanes"). We summarize this research, from the self-assembly of the first such clusters, through the elucidation of their mechanism of photoinduced rearrangement to release O(2), to recent advances highlighting their capability to catalyze sustained light-activated electrolysis of water. The [Mn(4)O(4)](6+) cubane core assembles spontaneously in solution from monomeric precursors or from [Mn(2)O(2)](3+) core complexes in the presence of metrically appropriate bidentate chelates, for example, diarylphosphinates (ligands of Ph(2)PO(2)(-) and 4-phenyl-substituted derivatives), which bridge pairs of Mn atoms on each cube face (Mn(4)O(4)L(6)). The [Mn(4)O(4)](6+) core is enlarged relative to the [Mn(2)O(2)](3+) core, resulting in considerably weaker Mn-O bonds. Cubanes are ferocious oxidizing agents, stronger than analogous complexes with the [Mn(2)O(2)](3+) core, as demonstrated both by the range of substrates they dehydrogenate or oxygenate (unactivated alkanes, for example) and the 25% larger O-H bond enthalpy of the resulting mu(3)-OH bridge. The cubane core topology is structurally suited to releasing O(2), and it does so in high yield upon removal of one phosphinate by photoexcitation in the gas phase or thermal excitation in the solid state. This is quite unlike other Mn-oxo complexes and can be attributed to the elongated Mn-O bond lengths and low-energy transition state to the mu-peroxo precursor. The photoproduct, [Mn(4)O(2)L(5)](+), an intact nonplanar butterfly core complex, is poised for oxidative regeneration of the cubane core upon binding of two water molecules and coupling to an anode. Catalytic evolution of O(2) and protons from water exceeding 1000 turnovers can be readily achieved by suspending the oxidized cubane, [Mn(4)O(4)L(6)](+), into a proton-conducting membrane (Nafion) preadsorbed onto a conducting electrode and electroxidizing the photoreduced butterfly complexes by the application of an external bias. Catalytic water oxidation can be achieved using sunlight as the only source of energy by replacing the external electrical bias with redox coupling to a photoanode incorporating a Ru(bipyridyl) dye.