47
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Skin-inspired highly stretchable and conformable matrix networks for multifunctional sensing

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Mechanosensation electronics (or Electronic skin, e-skin) consists of mechanically flexible and stretchable sensor networks that can detect and quantify various stimuli to mimic the human somatosensory system, with the sensations of touch, heat/cold, and pain in skin through various sensory receptors and neural pathways. Here we present a skin-inspired highly stretchable and conformable matrix network (SCMN) that successfully expands the e-skin sensing functionality including but not limited to temperature, in-plane strain, humidity, light, magnetic field, pressure, and proximity. The actualized specific expandable sensor units integrated on a structured polyimide network, potentially in three-dimensional (3D) integration scheme, can also fulfill simultaneous multi-stimulus sensing and achieve an adjustable sensing range and large-area expandability. We further construct a personalized intelligent prosthesis and demonstrate its use in real-time spatial pressure mapping and temperature estimation. Looking forward, this SCMN has broader applications in humanoid robotics, new prosthetics, human–machine interfaces, and health-monitoring technologies.

          Abstract

          Electronic skins have been developed to emulate human sensory systems, but simultaneous detection of multiple stimuli remains a big challenge due to coupling of electronic signals. Here, Hua et al. overcome this problem in a stretchable and conformable matrix network integrated with seven different modes.

          Related collections

          Most cited references45

          • Record: found
          • Abstract: found
          • Article: not found

          Design, fabrication and control of soft robots.

          Conventionally, engineers have employed rigid materials to fabricate precise, predictable robotic systems, which are easily modelled as rigid members connected at discrete joints. Natural systems, however, often match or exceed the performance of robotic systems with deformable bodies. Cephalopods, for example, achieve amazing feats of manipulation and locomotion without a skeleton; even vertebrates such as humans achieve dynamic gaits by storing elastic energy in their compliant bones and soft tissues. Inspired by nature, engineers have begun to explore the design and control of soft-bodied robots composed of compliant materials. This Review discusses recent developments in the emerging field of soft robotics.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers.

            The development of an electronic skin is critical to the realization of artificial intelligence that comes into direct contact with humans, and to biomedical applications such as prosthetic skin. To mimic the tactile sensing properties of natural skin, large arrays of pixel pressure sensors on a flexible and stretchable substrate are required. We demonstrate flexible, capacitive pressure sensors with unprecedented sensitivity and very short response times that can be inexpensively fabricated over large areas by microstructuring of thin films of the biocompatible elastomer polydimethylsiloxane. The pressure sensitivity of the microstructured films far surpassed that exhibited by unstructured elastomeric films of similar thickness, and is tunable by using different microstructures. The microstructured films were integrated into organic field-effect transistors as the dielectric layer, forming a new type of active sensor device with similarly excellent sensitivity and response times.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              A stretchable carbon nanotube strain sensor for human-motion detection.

              Devices made from stretchable electronic materials could be incorporated into clothing or attached directly to the body. Such materials have typically been prepared by engineering conventional rigid materials such as silicon, rather than by developing new materials. Here, we report a class of wearable and stretchable devices fabricated from thin films of aligned single-walled carbon nanotubes. When stretched, the nanotube films fracture into gaps and islands, and bundles bridging the gaps. This mechanism allows the films to act as strain sensors capable of measuring strains up to 280% (50 times more than conventional metal strain gauges), with high durability, fast response and low creep. We assembled the carbon-nanotube sensors on stockings, bandages and gloves to fabricate devices that can detect different types of human motion, including movement, typing, breathing and speech.
                Bookmark

                Author and article information

                Contributors
                baorongrong@binn.cas.cn
                cfpan@binn.cas.cn
                zhong.wang@mse.gatech.edu
                Journal
                Nat Commun
                Nat Commun
                Nature Communications
                Nature Publishing Group UK (London )
                2041-1723
                16 January 2018
                16 January 2018
                2018
                : 9
                : 244
                Affiliations
                [1 ]ISNI 0000000119573309, GRID grid.9227.e, CAS Center for Excellence in Nanoscience, Beijing Institute of Nanoenergy and Nanosystems, , Chinese Academy of Sciences, ; Beijing, 100083 China
                [2 ]ISNI 0000 0004 1797 8419, GRID grid.410726.6, School of Nanoscience and Technology, , University of Chinese Academy of Sciences, ; Beijing, 100049 China
                [3 ]ISNI 0000 0001 0662 3178, GRID grid.12527.33, Institute of Microelectronics, , Tsinghua University, ; Beijing, 100084 China
                [4 ]ISNI 0000 0001 2097 4943, GRID grid.213917.f, School of Materials Science and Engineering, , Georgia Institute of Technology, ; Atlanta, GA 30332-0245 USA
                Author information
                http://orcid.org/0000-0001-8900-4638
                http://orcid.org/0000-0001-6327-9692
                Article
                2685
                10.1038/s41467-017-02685-9
                5770430
                29339793
                e1718560-63d4-4ac1-b91d-161739c73f67
                © The Author(s) 2018

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 11 January 2016
                : 20 December 2017
                Categories
                Article
                Custom metadata
                © The Author(s) 2018

                Uncategorized
                Uncategorized

                Comments

                Comment on this article