6
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Silicon four-quadrant photodetector working at the 1550-nm telecommunication wavelength

      , , , ,
      Optics Letters
      Optica Publishing Group

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          In this Letter, we demonstrate a silicon four-quadrant photodetector working at the 1550-nm telecommunication wavelength and apply it to the measurements of the light-beam positions and deflection angles. Incident light changes the admittance of each quadrant photodetector through subbandgap optical absorption, and this change of admittance is read out through transimpedance amplification and lock-in readout circuitry. By monitoring the optical power received by the four quadrant photodetectors, we measure and track the position of the optical beam. Without any modification, the same device and associated circuit can also work at wavelengths shorter than the long-wavelength limit of silicon, for example, at 780 nm, as we demonstrate.

          Related collections

          Most cited references14

          • Record: found
          • Abstract: not found
          • Article: not found

          Non-Invasive On-Chip Light Observation by Contactless Waveguide Conductivity Monitoring

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide

            A simple method for simultaneously measuring the 6DOF geometric motion errors of the linear guide was proposed. The mechanisms for measuring straightness and angular errors and for enhancing their resolution are described in detail. A common-path method for measuring the laser beam drift was proposed and it was used to compensate the errors produced by the laser beam drift in the 6DOF geometric error measurements. A compact 6DOF system was built. Calibration experiments with certain standard measurement meters showed that our system has a standard deviation of 0.5 µm in a range of ± 100 µm for the straightness measurements, and standard deviations of 0.5", 0.5", and 1.0" in the range of ± 100" for pitch, yaw, and roll measurements, respectively.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Non-invasive monitoring and control in silicon photonics using CMOS integrated electronics

                Bookmark

                Author and article information

                Contributors
                Journal
                OPLEDP
                Optics Letters
                Opt. Lett.
                Optica Publishing Group
                0146-9592
                1539-4794
                2022
                2022
                August 04 2022
                August 15 2022
                : 47
                : 16
                : 4048
                Article
                10.1364/OL.468179
                c822b663-599b-4344-b715-dcd97a7d6768
                © 2022

                https://doi.org/10.1364/OA_License_v2#VOR

                History

                Comments

                Comment on this article