3
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Stretchable polymer composites with ultrahigh piezoelectric performance

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          ABSTRACT

          Flexible piezoelectric materials capable of withstanding large deformation play key roles in flexible electronics. Ferroelectric ceramics with a high piezoelectric coefficient are inherently brittle, whereas polar polymers exhibit a low piezoelectric coefficient. Here we report a highly stretchable/compressible piezoelectric composite composed of ferroelectric ceramic skeleton, elastomer matrix and relaxor ferroelectric-based hybrid at the ceramic/matrix interface as dielectric transition layers, exhibiting a giant piezoelectric coefficient of 250 picometers per volt, high electromechanical coupling factor k eff of 65%, ultralow acoustic impedance of 3MRyl and high cyclic stability under 50% compression strain. The superior flexibility and piezoelectric properties are attributed to the electric polarization and mechanical load transfer paths formed by the ceramic skeleton, and dielectric mismatch mitigation between ceramic fillers and elastomer matrix by the dielectric transition layer. The synergistic fusion of ultrahigh piezoelectric properties and superior flexibility in these polymer composites is expected to drive emerging applications in flexible smart electronics.

          Abstract

          Through structure design and interface modifications, this work addressed the dielectric as well as mechanical mismatch between ceramic and polymer in composites, leading to soft composites with ultrahigh piezoelectric performances comparable to piezoelectric ceramics.

          Related collections

          Most cited references37

          • Record: found
          • Abstract: not found
          • Article: not found

          Connectivity and piezoelectric-pyroelectric composites

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Freezing as a Path to Build Complex Composites

            S Deville (2006)
            Materials that are strong, ultralightweight, and tough are in demand for a range of applications, requiring architectures and components carefully designed from the micrometer down to the nanometer scale. Nacre, a structure found in many molluscan shells, and bone are frequently used as examples for how nature achieves this through hybrid organic-inorganic composites. Unfortunately, it has proven extremely difficult to transcribe nacre-like clever designs into synthetic materials, partly because their intricate structures need to be replicated at several length scales. We demonstrate how the physics of ice formation can be used to develop sophisticated porous and layered-hybrid materials, including artificial bone, ceramic-metal composites, and porous scaffolds for osseous tissue regeneration with strengths up to four times higher than those of materials currently used for implantation.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Bioinspired design and assembly of platelet reinforced polymer films.

              Although strong and stiff human-made composites have long been developed, the microstructure of today's most advanced composites has yet to achieve the order and sophisticated hierarchy of hybrid materials built up by living organisms in nature. Clay-based nanocomposites with layered structure can reach notable stiffness and strength, but these properties are usually not accompanied by the ductility and flaw tolerance found in the structures generated by natural hybrid materials. By using principles found in natural composites, we showed that layered hybrid films combining high tensile strength and ductile behavior can be obtained through the bottom-up colloidal assembly of strong submicrometer-thick ceramic platelets within a ductile polymer matrix.
                Bookmark

                Author and article information

                Contributors
                Journal
                Natl Sci Rev
                Natl Sci Rev
                nsr
                National Science Review
                Oxford University Press
                2095-5138
                2053-714X
                August 2023
                22 June 2023
                22 June 2023
                : 10
                : 8
                : nwad177
                Affiliations
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Center of Smart Materials and Devices, Wuhan University of Technology , Wuhan 430070, China
                State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Center of Smart Materials and Devices, Wuhan University of Technology , Wuhan 430070, China
                Advanced Research Institute of Multidisciplinary Science, Beijing Institute of Technology , Beijing 100081, China
                Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University , Beijing 100084, China
                Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University , Beijing 100084, China
                Center for Flexible Electronics Technology, Tsinghua University , Beijing 100084, China
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                Advanced Research Institute of Multidisciplinary Science, Beijing Institute of Technology , Beijing 100081, China
                Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University , Beijing 100084, China
                Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University , Beijing 100084, China
                Center for Flexible Electronics Technology, Tsinghua University , Beijing 100084, China
                School of Materials Science and Engineering, University of New South Wales , Kensington, NSW 2052, Australia
                Department of Materials Science and Engineering, The Pennsylvania State University , State College, PA 16802, USA
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong , Wollongong, NSW 2500, Australia
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                State Key Lab of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University , Beijing 100084, China
                Center for Flexible Electronics Technology, Tsinghua University , Beijing 100084, China
                Author notes
                Corresponding author. E-mail: shujun@ 123456uow.edu.au
                Corresponding author. E-mail: cwnan@ 123456tsinghua.edu.cn
                Corresponding author. E-mail: shyang_mse@ 123456tsinghua.edu.cn
                Author information
                https://orcid.org/0000-0002-8006-3495
                Article
                nwad177
                10.1093/nsr/nwad177
                10359065
                37485000
                8d77abdf-7f55-41cb-965c-ac9040cbdff9
                © The Author(s) 2023. Published by Oxford University Press on behalf of China Science Publishing & Media Ltd.

                This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited.

                History
                : 13 June 2023
                : 19 June 2023
                : 20 July 2023
                Page count
                Pages: 8
                Funding
                Funded by: National Natural Science Foundation of China, DOI 10.13039/501100001809;
                Award ID: 52388201
                Award ID: 52027817
                Award ID: 52002300
                Award ID: 92066103
                Funded by: National Key Research and Development Program of China, DOI 10.13039/501100012166;
                Award ID: 2020YFA0711700
                Funded by: Major Research Plan, DOI 10.13039/501100010905;
                Categories
                Research Article
                Materials Science
                Nsr/4
                AcademicSubjects/MED00010
                AcademicSubjects/SCI00010

                polymer composites,piezoelectric materials,structure design,flexible electronics

                Comments

                Comment on this article