Review of the State of Impurity Occurrences and Impurity Removal Technology in Phosphogypsum

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

A variety of co-existing impurities in phosphogypsum limit its large-scale and high-value utilization. This paper summarizes the common contents of major impurity components (silicon and phosphorus) and trace impurity components (fluorine, iron, aluminum, and carbon) in phosphogypsum and discusses the harm of impurity components to the comprehensive utilization of harmless phosphogypsum chemical resources. The occurrence status of impurity components in phosphogypsum and the research progress of various impurity removal technologies are summarized, and the effects of these impurity removal technologies on different contents of impurity components are evaluated. On this basis, the goal of improving the whiteness of phosphogypsum samples and the development of technology for further removal of impurities in phosphogypsum to improve the purity of the main content of calcium sulfate are speculated.

Related collections

Most cited references 115

Record: found
Abstract: found
Article: not found

Utilization of waste phosphogypsum to prepare hydroxyapatite nanoparticles and its application towards removal of fluoride from aqueous solution.

Kunjie Wang, D. Zhang, Liwen Zheng … (2012)

In the present study, waste phosphogypsum (PG) was utilized firstly to prepare hydroxyapatite nanoparticles (nHAp) via microwave irradiation technology. The nHAp derived from PG exhibited a hexagonal structure with the particle size about 20 nm × 60 nm and high purity. Meanwhile, the adsorption behaviour of fluoride onto the nHAp derived from PG was investigated to evaluate the potential application of this material for the treatment of the wastewater polluted with fluoride. The results indicate that the nHAp derived from PG can be used as an efficient adsorbent for the removal of fluoride from aqueous solution. The maximum adsorption capacities calculated from Langmuir-Freundlich model were 19.742, 26.108, 36.914 and 40.818 mg F(-)/g nHAp for 298, 308, 318 and 328 K, respectively. The pseudo-second order kinetic model was found to provide the best correlation of the used experimental data compared to the pseudo-first order and the adsorption isotherm could be well defined by Langmuir-Freundlich equation. The adsorption mechanism investigation shows that electrostatic interaction and hydrogen bond are the main driving force for fluoride uptake onto nHAp derived from waste PG. Copyright © 2012 Elsevier B.V. All rights reserved.