Enhanced photocatalytic degradation of ciprofloxacin by heterostructured BiOCl/Ti3C2Tx MXene nanocomposites

Urban wastewater treatment plants (UWTPs) are among the main sources of antibiotics' release into various compartments of the environment worldwide. The aim of the present paper is to critically review the fate and removal of various antibiotics in wastewater treatment, focusing on different processes (i.e. biological processes, advanced treatment technologies and disinfection) in view of the current concerns related to the induction of toxic effects in aquatic and terrestrial organisms, and the occurrence of antibiotics that may promote the selection of antibiotic resistance genes and bacteria, as reported in the literature. Where available, estimations of the removal of antibiotics are provided along with the main treatment steps. The removal efficiency during wastewater treatment processes varies and is mainly dependent on a combination of antibiotics' physicochemical properties and the operating conditions of the treatment systems. As a result, the application of alternative techniques including membrane processes, activated carbon adsorption, advanced oxidation processes (AOPs), and combinations of them, which may lead to higher removals, may be necessary before the final disposal of the effluents or their reuse for irrigation or groundwater recharge. Copyright © 2012 Elsevier Ltd. All rights reserved.

BiOCl single-crystalline nanosheets with exposed {001} and {010} facets were selectively synthesized via a facile hydrothermal route. The resulting BiOCl single-crystalline nanosheets with exposed {001} facets exhibited higher activity for direct semiconductor photoexcitation pollutant degradation under UV light, but the counterpart with exposed {010} facets possessed superior activity for indirect dye photosensitization degradation under visible light.

This study developed a method for analysis of nineteen quinolone and fluoroquinolone antibiotics (FQs) in sludge samples, and investigated the occurrence and fate of the FQs in a municipal sewage treatment plant (STP) with anaerobic, anoxic, and aerobic treatment processes. Eleven compounds, including pipemidic acid, fleroxacin, ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, sparfloxacin, gatifloxacin, moxifloxacin, and sarafloxacin (only in sludge), were detected in the STP. The predominance of ofloxacin and norfloxacin, followed by lomefloxacin, ciprofloxacin, gatifloxacin, and moxifloxacin, were found in wastewater, suspended solids, and sludge. The total concentrations of FQs were 2573 ± 241 ng/L, 1013 ± 218 ng/L, and 18.4 ± 0.9 mg/kg in raw sewage, secondary effluent, and sludge, respectively. Extremely low mass change percentages were observed for FQs in anaerobic, anoxic, and aerobic treatment units, suggesting biodegradation to be of minor importance in the removal of FQs in STPs. 50-87% of the initial FQs loadings (except for pipemidic acid (36%)) were ultimately found in the dewatered sludge. Mean removal efficiencies of FQs in the STP were 56-75%, except for new generation drugs such as moxifloxacin (40 ± 5%) and gatifloxacin (43 ± 13%). A significant positive correlation was found between removal efficiencies and K(d) of FQs. The major factor in the removal of FQs in the STP was sorption to sludge, which was not governed by hydrophobic interactions. The long-term cycling and persistence of FQs in the STP has made activated sludge as a huge reservoir of FQ antibiotics.