6
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Reduced graphene oxide coating enhances osteogenic differentiation of human mesenchymal stem cells on Ti surfaces

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Background

          Titanium (Ti) has been utilized as hard tissue replacement owing to its superior mechanical and bioinert property, however, lack in tissue compatibility and biofunctionality has limited its clinical use. Reduced graphene oxide (rGO) is one of the graphene derivatives that possess extraordinary biofunctionality and are known to induce osseointegration in vitro and in vivo. In this study, rGO was uniformly coated by meniscus-dragging deposition (MDD) technique to fabricate rGO-Ti substrate for orthopedic and dental implant application.

          Methods

          The physicochemical characteristics of rGO-coated Ti (rGO-Ti) substrates were evaluated by atomic force microscopy, water contact angle, and Raman spectroscopy. Furthermore, human mesenchymal stem cells (hMSCs) were cultured on the rGO-Ti substrate, and then their cellular behaviors such as growth and osteogenic differentiation were determined by a cell counting kit-8 assay, alkaline phosphatase (ALP) activity assay, and alizarin red S staining.

          Results

          rGO was coated uniformly on Ti substrates by MDD process, which allowed a decrease in the surface roughness and contact angle of Ti substrates. While rGO-Ti substrates significantly increased cell proliferation after 7 days of incubation, they significantly promoted ALP activity and matrix mineralization, which are early and late differentiation markers, respectively.

          Conclusion

          It is suggested that rGO-Ti substrates can be effectively utilized as dental and orthopedic bone substitutes since these graphene derivatives have potent effects on stimulating the osteogenic differentiation of hMSCs and showed superior bioactivity and osteogenic potential.

          Related collections

          Most cited references73

          • Record: found
          • Abstract: not found
          • Article: not found

          Hydrogels for tissue engineering.

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Surface modification of titanium, titanium alloys, and related materials for biomedical applications

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Porous scaffold design for tissue engineering.

              A paradigm shift is taking place in medicine from using synthetic implants and tissue grafts to a tissue engineering approach that uses degradable porous material scaffolds integrated with biological cells or molecules to regenerate tissues. This new paradigm requires scaffolds that balance temporary mechanical function with mass transport to aid biological delivery and tissue regeneration. Little is known quantitatively about this balance as early scaffolds were not fabricated with precise porous architecture. Recent advances in both computational topology design (CTD) and solid free-form fabrication (SFF) have made it possible to create scaffolds with controlled architecture. This paper reviews the integration of CTD with SFF to build designer tissue-engineering scaffolds. It also details the mechanical properties and tissue regeneration achieved using designer scaffolds. Finally, future directions are suggested for using designer scaffolds with in vivo experimentation to optimize tissue-engineering treatments, and coupling designer scaffolds with cell printing to create designer material/biofactor hybrids.
                Bookmark

                Author and article information

                Contributors
                mskang7909@gmail.com
                eric.jeong@gsmedi.com
                joe1026@naver.com
                bjkim016@gmail.com
                swhong@pusan.ac.kr
                nunssob@gmail.com
                nanohan@pusan.ac.kr
                Journal
                Biomater Res
                Biomater Res
                Biomaterials Research
                BioMed Central (London )
                1226-4601
                2055-7124
                12 February 2021
                12 February 2021
                2021
                : 25
                : 4
                Affiliations
                [1 ]GRID grid.262229.f, ISNI 0000 0001 0719 8572, Department of Cogno-Mechatronics Engineering, College of Nanoscience & Nanotechnology, , Pusan National University, ; Busan, 46241 South Korea
                [2 ]GS Medical Co., Ltd., Cheongju-si, Chungcheongbuk-do 28161 South Korea
                [3 ]GRID grid.262229.f, ISNI 0000 0001 0719 8572, Department of Optics and Mechatronics Engineering, College of Nanoscience & Nanotechnology, , Pusan National University, ; Busan, 46241 South Korea
                [4 ]GRID grid.459982.b, ISNI 0000 0004 0647 7483, Dental Life Science Research Institute / Innovation Research & Support Center for Dental Science, , Seoul National University Dental Hospital, ; Seoul, 03080 South Korea
                [5 ]Daan Korea Corporation, Seoul, 06252 South Korea
                Author information
                http://orcid.org/0000-0001-8314-1981
                Article
                205
                10.1186/s40824-021-00205-x
                7881470
                33579390
                7f4650ef-6021-4f45-9668-a06e9ed8f861
                © The Author(s) 2021

                Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver ( http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

                History
                : 17 November 2020
                : 4 February 2021
                Categories
                Research Article
                Custom metadata
                © The Author(s) 2021

                titanium,reduced graphene oxide,osteogenesis,bone tissue engineering,surface coating

                Comments

                Comment on this article