0
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Robust hollow nanocomposites with ruthenium–bipyridine complexes for heterogeneous catalysis of logic-controlled RAFT polymerization

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Logic-controlled RAFT photopolymerization has become a powerful and eco-friendly toolkit to create well-defined macromolecular buildups while exhibiting composition, sequence and spatiotemporal control.

          Abstract

          Photoinduced electron/energy transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization has become a powerful and eco-friendly toolkit to create well-defined macromolecular buildups while exhibiting composition, sequence and spatiotemporal control. Although PET-RAFT polymerization is generally much more convenient than living ionic polymerization, it is still a great challenge to regulate the polymerization upon multiple external stimuli and to simplify the procedures of post-polymerization purification. In this contribution, hHPGE-PFPPNRu nanocomposites were engineered as catalyst supports to firmly accommodate ruthenium–bipyridine complexes for heterogeneous catalysis of PET-RAFT polymerization. The manipulation of reaction temperature modulated the performance of the nanocatalysts, with a pronounced acceleration of the polymerization kinetics being identified at a temperature above the lower critical solution temperature (LCST) of poly( N-isopropylacrylamide) (PNIPAM) brushes compared to that below it. Consequently, the control of RAFT polymerization can be achieved upon the dual-stimuli of light and heat. Moreover, these nanocatalysts conferred radical polymerizations with myriad attractive features such as the adaptability of diverse monomer formulations and reaction media, exquisite control over the molecular variables, oxygen tolerance, and catalyst doses in the ppm range. Owing to the robust mechanical nature of nanocomposites, the separation and reuse of the nanocatalysts were readily realized by rapid centrifugation, and they showed inappreciable catalyst leakage along with consistent catalytic performance even after multiple polymerization runs.

          Related collections

          Most cited references44

          • Record: found
          • Abstract: found
          • Article: not found

          A robust and versatile photoinduced living polymerization of conjugated and unconjugated monomers and its oxygen tolerance.

          Controlled/living radical polymerization techniques have transformed polymer chemistry in the last few decades, affording the production of polymers with precise control over both molecular weights and architectures. It is now possible to synthesize almost an infinite variety of macromolecules using nonspecialized equipment, finding applications in high-tech industry. However, they have several shortcomings. Until recently, living radical polymerizations could not be controlled by an external stimulus, such as visible light, pH, mechanical, chemical, etc. Moreover, they are usually sensitive to trace amounts of oxygen in the system. In this Article, we report a photoinduced living polymerization technique, which is able to polymerize a large range of monomers, including conjugated and unconjugated monomers, using ultralow concentrations of an iridium-based photoredox catalyst (typically 1 ppm to monomers) and a low energy visible LED as the light source (1-4.8 W, λ(max) = 435 nm). The synthesis of homopolymers with molecular weights ranging from 1000 to 2,000,000 g/mol was successfully achieved with narrow molecular weight distributions (M(w)/M(n) < 1.3). In addition, chain extensions of poly(methacrylate)s, poly(styrene), poly(N-vinyl pyrrolidinone), poly(vinyl ester)s, and poly(acrylate)s were performed to prepare diblock copolymers. The reusability of the catalyst was demonstrated by the synthesis of a decablock polymer by multiple chain extensions. Most importantly, this process was employed to prepare well-defined polymers and multiblock copolymers in the presence of air.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications.

            The use of light to mediate controlled radical polymerization has emerged as a powerful strategy for rational polymer synthesis and advanced materials fabrication. This review provides a comprehensive survey of photocontrolled, living radical polymerizations (photo-CRPs). From the perspective of mechanism, all known photo-CRPs are divided into either (1) intramolecular photochemical processes or (2) photoredox processes. Within these mechanistic regimes, a large number of methods are summarized and further classified into subcategories based on the specific reagents, catalysts, etc., involved. To provide a clear understanding of each subcategory, reaction mechanisms are discussed. In addition, applications of photo-CRP reported so far, which include surface fabrication, particle preparation, photoresponsive gel design, and continuous flow technology, are summarized. We hope this review will not only provide informative knowledge to researchers in this field but also stimulate new ideas and applications to further advance photocontrolled reactions.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Organocatalyzed atom transfer radical polymerization driven by visible light.

              Atom transfer radical polymerization (ATRP) has become one of the most implemented methods for polymer synthesis, owing to impressive control over polymer composition and associated properties. However, contamination of the polymer by the metal catalyst remains a major limitation. Organic ATRP photoredox catalysts have been sought to address this difficult challenge but have not achieved the precision performance of metal catalysts. Here, we introduce diaryl dihydrophenazines, identified through computationally directed discovery, as a class of strongly reducing photoredox catalysts. These catalysts achieve high initiator efficiencies through activation by visible light to synthesize polymers with tunable molecular weights and low dispersities.
                Bookmark

                Author and article information

                Contributors
                Journal
                NANOHL
                Nanoscale
                Nanoscale
                Royal Society of Chemistry (RSC)
                2040-3364
                2040-3372
                July 18 2019
                2019
                : 11
                : 28
                : 13502-13510
                Affiliations
                [1 ]Key Laboratory of Biomedical Polymers of Ministry of Education
                [2 ]College of Chemistry and Molecular Science
                [3 ]Wuhan University
                [4 ]Wuhan
                [5 ]P. R. China
                [6 ]School of Physics and Astronomy
                [7 ]University of Leeds
                [8 ]LS2 9JT, Leeds
                [9 ]UK
                Article
                10.1039/C9NR04664J
                7a22b361-8488-49e4-a004-2b2aa45ba324
                © 2019

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article