13
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Characterization Of Natural Rubber/Cassava Starch/Maleated Natural Rubber Formulations

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The objective of this research study was to study the rheological and tensile behavior of natural rubber (NR) compounds with cassava starch (CS) and plasticized cassava starch (PCS), with the aim of using cassava as potential filler for NR vulcanizates. The authors also evaluated the synthesis and use of maleated Natural Rubber (MNR) as a coupling agent. The results obtained indicate that the presence of CS originates changes such as an increase in the maximum torque and a slight reduction in scorch and curing time. The addition of MNR to the blends of NR with and without CS also retarded the curing process. With regard to the mechanical properties, 20 phr of CS did not alter the tensile properties of the NR vulcanizates, so a cheaper formulation with equivalent properties can be obtained. The properties of the compounds with PCS were similar to those of the NR/CS compounds. Concerning the use of MNR as a coupling agent, it did not improve the overall properties of NR. Finally, the thermal degradation behavior of NR was not affected by the addition of CS, while the use of PCS accelerated the degradative process of NR

          Translated abstract

          El objetivo del presente trabajo fue estudiar el comportamiento reológico y tensil de los compuestos de caucho Natural (NR) con almidón de yuca natural (CS) y plastificado (PCS) para evaluar la posible utilización de estos materiales como carga reforzante. También, se sintetizó el caucho natural maleado (MNR) y se estudió su influencia como un agente acoplante para las formulaciones en estudio. Los resultados obtenidos indican que la adición de CS al NR incrementa el torque máximo y produce una ligera disminución de los tiempos scorch y de curado. La adición de MNR al NR con y si CS retarda el proceso de curado. También, se demostró que una proporción de 20 ppc de CS no altera las propiedades tensiles del NR vulcanizado, lo que implica que es posible lograr una formulación menos costosa. Las propiedades de los compuestos con PCS se mantuvieron similares a las de los compuestos de NR/CS. Con respecto al uso de MNR como agente acoplante, se demostró que no produce efectos positivos en el comportamiento global del NR. De los estudios termodegradativos del NR, se infiere que el comportamiento térmico del NR no se ve afectado por la adición de CS, mientras que el PCS acelera el proceso degradativo del compuesto

          Related collections

          Most cited references46

          • Record: found
          • Abstract: not found
          • Article: not found

          Rubber Chem. Technol.

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Polym. Int.

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Polym. Int.

                Bookmark

                Author and article information

                Contributors
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Journal
                rlmm
                Revista Latinoamericana de Metalurgia y Materiales
                Rev. LatinAm. Metal. Mater.
                Universidad Simón Bolívar (Caracas )
                0255-6952
                June 2011
                : 31
                : 1
                : 71-84
                Affiliations
                [1 ] Universidad Simón Bolívar Venezuela
                [2 ] Instituto Venezolano de Investigaciones Científicas Venezuela
                [3 ] Universidad Central de Venezuela Venezuela
                Article
                S0255-69522011000100011
                55f6d80a-dac6-4d4e-a408-aa93b95828c5

                http://creativecommons.org/licenses/by/4.0/

                History
                Product

                SciELO Venezuela

                Self URI (journal page): http://www.scielo.org.ve/scielo.php?script=sci_serial&pid=0255-6952&lng=en
                Categories
                MATERIALS SCIENCE, MULTIDISCIPLINARY
                METALLURGY & METALLURGICAL ENGINEERING

                General materials science,General engineering
                Natural rubber,Characterization,Cassava starch,Maleated natural rubber,Vulcanization,Caucho natural,Caracterización,Almidón de yuca,Caucho natural maleado,Vulcanización

                Comments

                Comment on this article