Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material

Abstract

Efficient ternary all polymer solar cells (all-PSCs) based on PTB7-Th: PBDD-ff4T: N2200 were reported, where PTB7-Th and PBDD-ff4T were two polymer donors and N2200 was a polymer acceptor. The all-PSCs showed an optimized PCE of up to 7.2% which is superior to those of the binary all-PSCs based on PTB7-Th: N2200 and PBDD-ff4T: N2200.

Abstract

Ternary blending is one of the effective strategies to broaden the complementary absorption range and smooth the energy level at the donor/acceptor interface for achieving high efficiency bulk heterojunction (BHJ) polymer solar cells (PSCs). In this study, we report efficient ternary blend all-polymer solar cells (all-PSCs) with complementary absorption bands based on two polymer donors PTB7-Th and PBDD-ff4T and one polymer acceptor N2200. The polythiophene derivative PBDD-ff4T as a hole-cascade material plays a bridging role in energy levels between PTB7-Th and N2200, and thus provides more efficient channels for charge transfer. The ternary all-PSCs with 10 wt% PBDD-ff4T content show efficient photon harvesting, enhanced charge mobility and better active layer morphology due to the induced crystallization of PTB7-Th by the inserted PBDD-ff4T in the donor domains. As a result, the device without any extra treatments exhibits an optimized power conversion efficiency (PCE) of 7.2% with an open circuit voltage ( V _oc) of 0.82 V, a short circuit current density ( J _sc) of 15.7 mA cm ⁻², and a fill factor (FF) of 56%. While the PCEs are 5.9% and 4.2% for the all-PSCs based on the binary blends PTB7-Th: N2200 and PBDD-ff4T: N2200, respectively. This PCE of 7.2% is one of the highest values reported in the literature so far for ternary all-PSCs and polythiophene derivative-based all-PSCs.