La presente investigación tiene como propósito evaluar la adsorción de la Rodamina WT (RWT), litio y cloruro en contacto con lodo anaerobio usando reactores por lotes. Se instalaron 4 reactores de 1 L (uno para cada trazador y un blanco). Se inocularon 200 mL (20%) de lodo anaerobio granular proveniente de una cervecería local y posteriormente se alimentó con agua residual municipal (ARM) de la ciudad de Maracaibo. Cada trazador se agregó cuando el tratamiento estaba estable lo cual se evidenció por una producción de biogás entre 35,5 y 40,5 mL/d. La alcalinidad de los reactores (360-430 mgCaCO3/L) fue suficiente para mantener el pH en un intervalo cercano a la neutralidad (6,41 a 6,62). Los resultados mostraron una adsorción favorable para la RWT de acuerdo al modelo de adsorción de Langmuir la que aumentó con el incremento en la concentración. Se encontraron adsorbancias (q e) desde 1,777E-5 hasta 3,462E-5 mgRWT/g lodo, para la RWT, lo que no ocurrió para el litio y el cloruro.
The aim of this study is to evaluate trace's mass adsorptive property of anaerobic sludge in batch reactors. Three types of tracers were prepared, i.e. Rhodamine WT (RWT), lithium and chlorine. 4 reactors of one liter were inoculated with 200 mL (20%) of anaerobic granular sludge from a local brewery and fed with municipal wastewater (ARM) from Maracaibo city. The systems were considered stable when the biogas production was between 35.5 and 40.5 mL/d. At that moment the tracers were added to either reactor. The alkalinity were measured from 360-430 mgCaCO3/L, sufficient to maintain the pH in the range close to neutral (6.41 to 6.62). The results show that RWT tracer's mass was favorable for adsorption and according to Langmuir adsorption model it increased with increasing concentration. Adsorption (q e) varied from 1.777 E-5 - 3.462 E-5 mgWRT/g sludge. No adsorption was observed with lithium and chlorine.