7
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Characterization and Antimicrobial Activity of Biodegradable Active Packaging Enriched with Clove and Thyme Essential Oil for Food Packaging Application

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Bioactive packaging contains natural antimicrobial agents, which inhibit the growth of microorganisms and increase the food shelf life. Solvent casting method was used to prepare the Poly (lactide)-Poly (butylene adipate-co-terephthalate) (PLA-PBAT) film incorporated with the thyme oil and clove oil in various concentrations (1 wt%, 5 wt% and 10 wt%). The clove oil composite films depicted less green and more yellow as compared to thyme oil composite films. Clove oil composite film has shown an 80% increase in the UV blocking efficiency. The tensile strength (TS) of thyme oil and clove oil composite film decreases from 1.35 MPs (control film) to 0.96 MPa and 0.79, respectively. A complete killing of S. aureus that is a reduction from 6.5 log CFU/mL to 0 log CFU/mL was observed on the 10 wt% clove oil incorporated composite film. Clove oil and thyme oil composite film had inhibited E. coli biofilm by 93.43% and 82.30%, respectively. Clove oil composite film had exhibited UV blocking properties, strong antimicrobial activity and has high potential to be used as an active food packaging.

          Related collections

          Most cited references43

          • Record: found
          • Abstract: not found
          • Article: not found

          Essential oils as additives in biodegradable films and coatings for active food packaging

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Structure and reactivity of water at biomaterial surfaces.

            Molecular self association in liquids is a physical process that can dominate cohesion (interfacial tension) and miscibility. In water, self association is a powerful organizational force leading to a three-dimensional hydrogen-bonded network (water structure). Localized perturbations in the chemical potential of water as by, for example, contact with a solid surface, induces compensating changes in water structure that can be sensed tens of nanometers from the point of origin using the surface force apparatus (SFA) and ancillary techniques. These instruments reveal attractive or repulsive forces between opposing surfaces immersed in water, over and above that anticipated by continuum theory (DLVO), that are attributed to a variable density (partial molar volume) of a more-or-less ordered water structure, depending on the water wettability (surface energy) of the water-contacting surfaces. Water structure at surfaces is thus found to be a manifestation of hydrophobicity and, while mechanistic/theoretical interpretation of experimental results remain the subject of some debate in the literature, convergence of experimental observations permit, for the first time, quantitative definition of the relative terms 'hydrophobic' and 'hydrophilic'. In particular, long-range attractive forces are detected only between surfaces exhibiting a water contact angle theta > 65 degrees (herein defined as hydrophobic surfaces with pure water adhesion tension tau O = gamma O cos theta 30 dyn/cm). These findings suggest at least two distinct kinds of water structure and reactivity: a relatively less-dense water region against hydrophobic surfaces with an open hydrogen-bonded network and a relatively more-dense water region against hydrophilic surfaces with a collapsed hydrogen-bonded network. Importantly, membrane and SFA studies reveal a discrimination between biologically-important ions that preferentially solubilizes divalent ions in more-dense water regions relative to less-dense water regions in which monovalent ions are enriched. Thus, the compelling conclusion to be drawn from the collective scientific evidence gleaned from over a century of experimental and theoretical investigation is that solvent properties of water within the interphase separating a solid surface from bulk water solution vary with contacting surface chemistry. This interphase can extend tens of nanometers from a water-contacting surface due to a propagation of differences in self association between vicinal water and bulk-phase water. Physicochemical properties of interfacial water profoundly influence the biological response to materials in a surprisingly straightforward manner when key measures of biological activity sensitive to interfacial phenomena are scaled against water adhesion tension tau O of contacting surfaces. As examples, hydrophobic surfaces (tau O 30 dyn/cm) do not support adsorption because this mechanism is energetically unfavorable. Protein-adsorbing hydrophobic surfaces are inefficient contact activators of the blood coagulation cascade whereas protein-repellent hydrophilic surfaces are efficient activators of blood coagulation. Mammalian cell attachment is a process distinct from protein adsorption that occurs efficiently to hydrophilic surfaces but inefficiently to hydrophobic surfaces. (ABSTRACT TRUNCATED)
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Use of essential oils in active food packaging: Recent advances and future trends

                Bookmark

                Author and article information

                Journal
                Foods
                Foods
                foods
                Foods
                MDPI
                2304-8158
                13 August 2020
                August 2020
                : 9
                : 8
                : 1117
                Affiliations
                [1 ]School of Food Science and Environmental Health, College of Sciences and Health, Technological University Dublin—City Campus, Grangegorman, D07H6K8 Dublin, Ireland; Shubham.Sharma@ 123456TUDublin.ie (S.S.); C16713221@ 123456mytudublin.ie (S.B.); swarna.jaiswal@ 123456TUDublin.ie (S.J.)
                [2 ]Environmental Sustainability and Health Institute (ESHI), Technological University Dublin—City Campus, Grangegorman, D07H6K8 Dublin, Ireland
                [3 ]Centre for Research in Engineering and Surface Technology (CREST), FOCAS Institute, Technological University Dublin—City Campus, Kevin Street, D08NF82 Dublin, Ireland; brendan.duffy@ 123456TUDublin.ie
                Author notes
                [* ]Correspondence: amit.jaiswal@ 123456TUDublin.ie or akjaiswal@ 123456outlook.com ; Tel.: +353-1220-5661
                Author information
                https://orcid.org/0000-0003-3949-3474
                https://orcid.org/0000-0002-4551-4182
                https://orcid.org/0000-0003-1414-9052
                Article
                foods-09-01117
                10.3390/foods9081117
                7466377
                32823666
                3a5d5aa7-2ba9-4e27-acdd-cff214d9cb37
                © 2020 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 15 July 2020
                : 11 August 2020
                Categories
                Article

                active food packaging,antimicrobial activity,antibiofilm activity,clove essential oils,thyme essential oil,poly (lactide),poly (butylene adipate-co-terephthalate)

                Comments

                Comment on this article