Biochar as a low-cost adsorbent for aqueous heavy metal removal: A review

Arsenic's history in science, medicine and technology has been overshadowed by its notoriety as a poison in homicides. Arsenic is viewed as being synonymous with toxicity. Dangerous arsenic concentrations in natural waters is now a worldwide problem and often referred to as a 20th-21st century calamity. High arsenic concentrations have been reported recently from the USA, China, Chile, Bangladesh, Taiwan, Mexico, Argentina, Poland, Canada, Hungary, Japan and India. Among 21 countries in different parts of the world affected by groundwater arsenic contamination, the largest population at risk is in Bangladesh followed by West Bengal in India. Existing overviews of arsenic removal include technologies that have traditionally been used (oxidation, precipitation/coagulation/membrane separation) with far less attention paid to adsorption. No previous review is available where readers can get an overview of the sorption capacities of both available and developed sorbents used for arsenic remediation together with the traditional remediation methods. We have incorporated most of the valuable available literature on arsenic remediation by adsorption ( approximately 600 references). Existing purification methods for drinking water; wastewater; industrial effluents, and technological solutions for arsenic have been listed. Arsenic sorption by commercially available carbons and other low-cost adsorbents are surveyed and critically reviewed and their sorption efficiencies are compared. Arsenic adsorption behavior in presence of other impurities has been discussed. Some commercially available adsorbents are also surveyed. An extensive table summarizes the sorption capacities of various adsorbents. Some low-cost adsorbents are superior including treated slags, carbons developed from agricultural waste (char carbons and coconut husk carbons), biosorbents (immobilized biomass, orange juice residue), goethite and some commercial adsorbents, which include resins, gels, silica, treated silica tested for arsenic removal come out to be superior. Immobilized biomass adsorbents offered outstanding performances. Desorption of arsenic followed by regeneration of sorbents has been discussed. Strong acids and bases seem to be the best desorbing agents to produce arsenic concentrates. Arsenic concentrate treatment and disposal obtained is briefly addressed. This issue is very important but much less discussed. Show more

In recent years, many studies have been devoted to investigate the application of biochar for pollutants removal from aqueous solutions. Biochar exhibits a great potential to efficiently tackle water contaminants considering the wide availability of feedstock, low-cost and favorable physical/chemical surface characteristics. This review provides an overview of biochar production technologies, biochar properties, and recent advances in the removal of heavy metals, organic pollutants and other inorganic pollutants using biochar. Experimental studies related to the adsorption behaviors of biochar toward various contaminants, key affecting factors and the underlying mechanisms proposed to explain the adsorption behaviors, have been comprehensively reviewed. Furthermore, research gaps and uncertainties that exist in the use of biochar as an adsorbent are identified. Further research needs for biochar and potential areas for future application of biochars are also proposed. Show more