Microwave-assisted pyrolysis derived biochar for volatile organic compounds treatment: Characteristics and adsorption performance

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

<p class="first" id="d6602599e140">Biochar derived from corn stalk doping with activated carbon was produced by microwave-assisted pyrolysis and applied to sorb volatile organic compounds (VOCs: benzene and o-xylene). Specific surface area (SSA), total pore volume (TPV) and micropore volume (MV) of microwave biochar increased with increasing microwave power with the maximum values 325.2 m2·g-1, 0.181 mL·g-1 and 0.1420 mL·g-1, respectively. Adsorption capacities of benzene and o-xylene on microwave biochar ranged 6.82-54.75 mg·g-1 and 7.43-48.73 mg·g-1, which were separate positively related with SSA, TPV, and MV. Benzene adsorption was mainly dominated by surface interaction and partition mechanisms, while o-xylene adsorption was governed by pore filling. The adsorption capacities of microwave biochar for benzene and o-xylene decreased by only 0.30% and 0.99% on the 5th cycle that illustrated the reasonably good reusability of microwave biochar. The results of this research demonstrate that microwave biochar is a promising adsorbent for VOCs removal. </p>

Related collections

Most cited references 45

Record: found
Abstract: found
Article: not found

Surface functional groups of carbon-based adsorbents and their roles in the removal of heavy metals from aqueous solutions: A critical review

Xiaodong Yang, Yongshan Wan, Yulin Zheng … (2019)

Carbon-based adsorbents such as graphene and its derivatives, carbon nanotubes, activated carbon, and biochar are often used to remove heavy metals from aqueous solutions. One of the important aspects of effective carbon adsorbents for heavy metals is their tunable surface functional groups. To promote the applications of functionalized carbon adsorbents in heavy metal removal, a systematic documentation of their syntheses and interactions with metals in aqueous solution is crucial. This work provides a comprehensive review of recent research on various carbon adsorbents in terms of their surface functional groups and the associated removal behaviors and performances to heavy metals in aqueous solutions. The governing removal mechanisms of carbon adsorbents to aqueous heavy metals are first outlined with a special focus on the roles of surface functional groups. It then summarizes and categorizes various synthesis methods that are commonly used to introduce heteroatoms, primarily oxygen, nitrogen, and sulfur, onto carbon surfaces for enhanced surface functionalities and sorptive properties to heavy metals in aqueous solutions. After that, the effects of various functional groups on adsorption behaviors of heavy metals onto the functionalized carbon adsorbents are elucidated. A perspective of future work on functional carbon adsorbents for heavy metal removal as well as other potential applications is also presented at the end.

0 comments Cited 261 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Adsorption of VOCs onto engineered carbon materials: A review.

Xueyang Zhang, Bin Gao, Anne Elise Creamer … (2017)

Volatile organic compounds (VOCs) severely threaten human health and the ecological environment because most of them are toxic, mutagenic, and carcinogenic. The persistent increase of VOCs together with the stringent regulations make the reduction of VOC emissions more imperative. Up to now, numerous VOC treatment technologies have emerged, such as incineration, condensation, biological degradation, absorption, adsorption, and catalysis oxidation et al. Among them, the adsorption technology has been recognized as an efficient and economical control strategy because it has the potential to recover and reuse both adsorbent and adsorbate. Due to their large specific surface area, rich porous structure, and high adsorption capacity, carbonaceous adsorbents are widely used in gas purification, especially with respect to VOC treatment and recovery. This review discusses recent research developments of VOC adsorption onto a variety of engineered carbonaceous adsorbents, including activated carbon, biochar, activated carbon fiber, carbon nanotube, graphene and its derivatives, carbon-silica composites, ordered mesoporous carbon, etc. The key factors influence the VOC adsorption are analyzed with focuses on the physiochemical characters of adsorbents, properties of adsorbates as well as the adsorption conditions. In addition, the sources, health effect, and abatement methods of VOCs are also described.