Formulating High‐Rate and Long‐Cycle Heterostructured Layered Oxide Cathodes by Local Chemistry and Orbital Hybridization Modulation for Sodium‐Ion Batteries

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

It is still very urgent and challenging to simultaneously develop high‐rate and long‐cycle oxide cathodes for sodium‐ion batteries (SIBs) because of the sluggish kinetics and complex multiphase evolution during cycling. Here, the concept of accurately manipulating structural evolution and formulating high‐performance heterostructured biphasic layered oxide cathodes by local chemistry and orbital hybridization modulation is reported. The P2‐structure stoichiometric composition of the cathode material shows a layered P2‐ and O3‐type heterostructure that is explicitly evidenced by various macroscale and atomic‐scale techniques. Surprisingly, the heterostructured cathode displays excellent rate performance, remarkable cycling stability (capacity retention of 82.16% after 600 cycles at 2 C), and outstanding compatibility with hard carbon anode because of the integrated advantages of intergrowth structure and local environment regulation. Meanwhile, the formation process from precursors during calcination and the highly reversible dynamic structural evolution during the Na ⁺ intercalation/deintercalation process are clearly articulated by a series of in situ characterization techniques. Also, the intrinsic structural properties and corresponding electrochemical behavior are further elucidated by the density of states and electron localization function of density functional theory calculations. Overall, this strategy, which finely tunes the local chemistry and orbitals hybridization for high‐performance SIBs, will open up a new field for other materials.

Related collections

Most cited references 71

Record: found
Abstract: found
Article: not found

High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance.

Veronica Augustyn, Jeremy Come, Michael A. Lowe … (2013)

Pseudocapacitance is commonly associated with surface or near-surface reversible redox reactions, as observed with RuO2·xH2O in an acidic electrolyte. However, we recently demonstrated that a pseudocapacitive mechanism occurs when lithium ions are inserted into mesoporous and nanocrystal films of orthorhombic Nb2O5 (T-Nb2O5; refs 1,2). Here, we quantify the kinetics of charge storage in T-Nb2O5: currents that vary inversely with time, charge-storage capacity that is mostly independent of rate, and redox peaks that exhibit small voltage offsets even at high rates. We also define the structural characteristics necessary for this process, termed intercalation pseudocapacitance, which are a crystalline network that offers two-dimensional transport pathways and little structural change on intercalation. The principal benefit realized from intercalation pseudocapacitance is that high levels of charge storage are achieved within short periods of time because there are no limitations from solid-state diffusion. Thick electrodes (up to 40 μm thick) prepared with T-Nb2O5 offer the promise of exploiting intercalation pseudocapacitance to obtain high-rate charge-storage devices.

0 comments Cited 926 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: found

Is Open Access

Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance

Dongliang Chao, Changrong Zhu, Peihua Yang … (2016)

Sodium-ion batteries are a potentially low-cost and safe alternative to the prevailing lithium-ion battery technology. However, it is a great challenge to achieve fast charging and high power density for most sodium-ion electrodes because of the sluggish sodiation kinetics. Here we demonstrate a high-capacity and high-rate sodium-ion anode based on ultrathin layered tin(II) sulfide nanostructures, in which a maximized extrinsic pseudocapacitance contribution is identified and verified by kinetics analysis. The graphene foam supported tin(II) sulfide nanoarray anode delivers a high reversible capacity of ∼1,100 mAh g−1 at 30 mA g−1 and ∼420 mAh g−1 at 30 A g−1, which even outperforms its lithium-ion storage performance. The surface-dominated redox reaction rendered by our tailored ultrathin tin(II) sulfide nanostructures may also work in other layered materials for high-performance sodium-ion storage.

0 comments Cited 331 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials.

Dong-Hwa Seo, Jinhyuk Lee, Alexander Urban … (2016)

Lithium-ion batteries are now reaching the energy density limits set by their electrode materials, requiring new paradigms for Li(+) and electron hosting in solid-state electrodes. Reversible oxygen redox in the solid state in particular has the potential to enable high energy density as it can deliver excess capacity beyond the theoretical transition-metal redox-capacity at a high voltage. Nevertheless, the structural and chemical origin of the process is not understood, preventing the rational design of better cathode materials. Here, we demonstrate how very specific local Li-excess environments around oxygen atoms necessarily lead to labile oxygen electrons that can be more easily extracted and participate in the practical capacity of cathodes. The identification of the local structural components that create oxygen redox sets a new direction for the design of high-energy-density cathode materials.