0
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Preparation, characterization, and bio-degradation studies of high-performance bio-based polyimides based on bicyclic diamines derived from citric acid

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The citric acid-based diamines are a bio-based building block that combines adequate rigidity, good thermal stability, interesting optical activities, and good biodegradability for the construction of high-performance functional polyimides.

          Abstract

          Two new bioderived diamines with two cis-fused cyclopentane ring structures, bis(4-aminophenyl) (octahydropentalene-2,5-diyl)dicarbamate (OAC) and 4,4′-((octahydropentalene-2,5-diyl)bis(oxy))dianiline (OOD), were designed and synthesized from natural citric acid for the first time. Two series of new bio-based polyimides ((PI(B/F/HAC) and PI(B/F/HOD)) were developed by the polymerization of OAC and OOD with three commercial dianhydrides, respectively. Due to the introduction of the two cis-fused cyclopentane ring structures with optically asymmetric active carbon atoms, the as-prepared polyimides exhibit light color or even colorless and transparent properties, as well as interesting optical activities. The transmittance at 400 nm and total optical transmittance (380–800 nm) for PI(HAC) are 83.5% and 86.6%, and those for PI(HOD) are 84.3% and 88.5%, respectively. PI(BAC) containing carbamate moieties in the polymer backbone shows excellent dimensional stability and mechanical properties, with a coefficient of thermal expansion (CTE) value below 18 ppm k −1 (close to that of Cu), a tensile strength of 115.8 MPa and a modulus of 2.9 GPa. The relationship between the structure and properties of polymers was also investigated through molecular simulation and Gaussian calculations. In addition, we have studied the biodegradable behaviors of these bio-based polyimides. After 49 days of degradation by porcine pancreatic lipase, the number average molecular weight and weight average molecular weight of PI(FAC) changed by approximately 75% and 90%, respectively, which proved to be a potential solution to the environmental problems caused by polyimide. This work provides new ideas for the development of new biomass functional monomers, chiral polymers, and biodegradable polyimides, which have strong academic exploration value.

          Related collections

          Most cited references61

          • Record: found
          • Abstract: found
          • Article: not found

          Sustainable polymers from renewable resources

          Renewable resources are used increasingly in the production of polymers. In particular, monomers such as carbon dioxide, terpenes, vegetable oils and carbohydrates can be used as feedstocks for the manufacture of a variety of sustainable materials and products, including elastomers, plastics, hydrogels, flexible electronics, resins, engineering polymers and composites. Efficient catalysis is required to produce monomers, to facilitate selective polymerizations and to enable recycling or upcycling of waste materials. There are opportunities to use such sustainable polymers in both high-value areas and in basic applications such as packaging. Life-cycle assessment can be used to quantify the environmental benefits of sustainable polymers.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            The irruption of polymers from renewable resources on the scene of macromolecular science and technology

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Polymers for flexible displays: From material selection to device applications

                Bookmark

                Author and article information

                Contributors
                Journal
                JMCCCX
                Journal of Materials Chemistry C
                J. Mater. Chem. C
                Royal Society of Chemistry (RSC)
                2050-7526
                2050-7534
                January 19 2023
                2023
                : 11
                : 3
                : 1082-1094
                Affiliations
                [1 ]PCFM Lab, GD HPPC Lab, Guangdong Engineering Technology Research Centre for High-performance Organic and Polymer Photoelectric Functional Films, State Key Laboratory of Optoelectronic Materials and Technologies, School of Chemistry, Sun Yat-sen University, Guangzhou, 510275, China
                [2 ]Instrumental Analysis & Research Center, Sun Yat-sen University, Guangzhou 510275, China
                Article
                10.1039/D2TC03639H
                10b0d8c2-e10b-45e5-941e-8ad93c47776b
                © 2023

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article