4
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: not found
      • Article: not found

      Augmented performance of tubular solar still integrated with cost-effective nano-based mushrooms

      , , , , , ,
      Solar Energy
      Elsevier BV

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Related collections

          Most cited references96

          • Record: found
          • Abstract: found
          • Article: not found

          Solar steam generation by heat localization.

          Currently, steam generation using solar energy is based on heating bulk liquid to high temperatures. This approach requires either costly high optical concentrations leading to heat loss by the hot bulk liquid and heated surfaces or vacuum. New solar receiver concepts such as porous volumetric receivers or nanofluids have been proposed to decrease these losses. Here we report development of an approach and corresponding material structure for solar steam generation while maintaining low optical concentration and keeping the bulk liquid at low temperature with no vacuum. We achieve solar thermal efficiency up to 85% at only 10 kW m(-2). This high performance results from four structure characteristics: absorbing in the solar spectrum, thermally insulating, hydrophilic and interconnected pores. The structure concentrates thermal energy and fluid flow where needed for phase change and minimizes dissipated energy. This new structure provides a novel approach to harvesting solar energy for a broad range of phase-change applications.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Global, regional, and national causes of child mortality: an updated systematic analysis for 2010 with time trends since 2000.

            Information about the distribution of causes of and time trends for child mortality should be periodically updated. We report the latest estimates of causes of child mortality in 2010 with time trends since 2000. Updated total numbers of deaths in children aged 0-27 days and 1-59 months were applied to the corresponding country-specific distribution of deaths by cause. We did the following to derive the number of deaths in children aged 1-59 months: we used vital registration data for countries with an adequate vital registration system; we applied a multinomial logistic regression model to vital registration data for low-mortality countries without adequate vital registration; we used a similar multinomial logistic regression with verbal autopsy data for high-mortality countries; for India and China, we developed national models. We aggregated country results to generate regional and global estimates. Of 7·6 million deaths in children younger than 5 years in 2010, 64·0% (4·879 million) were attributable to infectious causes and 40·3% (3·072 million) occurred in neonates. Preterm birth complications (14·1%; 1·078 million, uncertainty range [UR] 0·916-1·325), intrapartum-related complications (9·4%; 0·717 million, 0·610-0·876), and sepsis or meningitis (5·2%; 0·393 million, 0·252-0·552) were the leading causes of neonatal death. In older children, pneumonia (14·1%; 1·071 million, 0·977-1·176), diarrhoea (9·9%; 0·751 million, 0·538-1·031), and malaria (7·4%; 0·564 million, 0·432-0·709) claimed the most lives. Despite tremendous efforts to identify relevant data, the causes of only 2·7% (0·205 million) of deaths in children younger than 5 years were medically certified in 2010. Between 2000 and 2010, the global burden of deaths in children younger than 5 years decreased by 2 million, of which pneumonia, measles, and diarrhoea contributed the most to the overall reduction (0·451 million [0·339-0·547], 0·363 million [0·283-0·419], and 0·359 million [0·215-0·476], respectively). However, only tetanus, measles, AIDS, and malaria (in Africa) decreased at an annual rate sufficient to attain the Millennium Development Goal 4. Child survival strategies should direct resources toward the leading causes of child mortality, with attention focusing on infectious and neonatal causes. More rapid decreases from 2010-15 will need accelerated reduction for the most common causes of death, notably pneumonia and preterm birth complications. Continued efforts to gather high-quality data and enhance estimation methods are essential for the improvement of future estimates. The Bill & Melinda Gates Foundation. Copyright © 2012 Elsevier Ltd. All rights reserved.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Graphene oxide-based efficient and scalable solar desalination under one sun with a confined 2D water path

              Direct solar desalination, which produces desalinated water directly using solar energy with minimum carbon footprint, is considered a promising technology to address the global water scarcity. Here, we report a solar desalination device, with efficient two-dimensional water supply and suppressed thermal loss, which can enable an efficient (80% under one-sun illumination) and effective (four orders salinity decrement) solar desalination. The energy transfer efficiency of this foldable graphene oxide film-based device fabricated by a scalable process is independent of water quantity and can be achieved without optical or thermal supporting systems, therefore significantly improving the scalability and feasibility of this technology toward a complementary portable and personalized water solution. Because it is able to produce desalinated water directly using solar energy with minimum carbon footprint, solar steam generation and desalination is considered one of the most important technologies to address the increasingly pressing global water scarcity. Despite tremendous progress in the past few years, efficient solar steam generation and desalination can only be achieved for rather limited water quantity with the assistance of concentrators and thermal insulation, not feasible for large-scale applications. The fundamental paradox is that the conventional design of direct absorber−bulk water contact ensures efficient energy transfer and water supply but also has intrinsic thermal loss through bulk water. Here, enabled by a confined 2D water path, we report an efficient (80% under one-sun illumination) and effective (four orders salinity decrement) solar desalination device. More strikingly, because of minimized heat loss, high efficiency of solar desalination is independent of the water quantity and can be maintained without thermal insulation of the container. A foldable graphene oxide film, fabricated by a scalable process, serves as efficient solar absorbers (>94%), vapor channels, and thermal insulators. With unique structure designs fabricated by scalable processes and high and stable efficiency achieved under normal solar illumination independent of water quantity without any supporting systems, our device represents a concrete step for solar desalination to emerge as a complementary portable and personalized clean water solution.
                Bookmark

                Author and article information

                Journal
                Solar Energy
                Solar Energy
                Elsevier BV
                0038092X
                November 2021
                November 2021
                : 228
                : 27-37
                Article
                10.1016/j.solener.2021.09.034
                09501c20-7dbf-49a8-aaee-05aa22632777
                © 2021

                https://www.elsevier.com/tdm/userlicense/1.0/

                History

                Comments

                Comment on this article