9
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Osteochondral Tissue Regeneration Using a Tyramine-Modified Bilayered PLGA Scaffold Combined with Articular Chondrocytes in a Porcine Model

      research-article

      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Repairing damaged articular cartilage is challenging due to the limited regenerative capacity of hyaline cartilage. In this study, we fabricated a bilayered poly (lactic-co-glycolic acid) (PLGA) scaffold with small (200–300 μm) and large (200–500 μm) pores by salt leaching to stimulate chondrocyte differentiation, cartilage formation, and endochondral ossification. The scaffold surface was treated with tyramine to promote scaffold integration into native tissue. Porcine chondrocytes retained a round shape during differentiation when grown on the small pore size scaffold, and had a fibroblast-like morphology during transdifferentiation in the large pore size scaffold after five days of culture. Tyramine-treated scaffolds with mixed pore sizes seeded with chondrocytes were pressed into three-mm porcine osteochondral defects; tyramine treatment enhanced the adhesion of the small pore size scaffold to osteochondral tissue and increased glycosaminoglycan and collagen type II (Col II) contents, while reducing collagen type X (Col X) production in the cartilage layer. Col X content was higher for scaffolds with a large pore size, which was accompanied by the enhanced generation of subchondral bone. Thus, chondrocytes seeded in tyramine-treated bilayered scaffolds with small and large pores in the upper and lower parts, respectively, can promote osteochondral regeneration and integration for articular cartilage repair.

          Related collections

          Most cited references74

          • Record: found
          • Abstract: found
          • Article: not found

          The effect of pore size on cell adhesion in collagen-GAG scaffolds.

          The biological activity of scaffolds used in tissue engineering applications hypothetically depends on the density of available ligands, scaffold sites at which specific cell binding occurs. Ligand density is characterized by the composition of the scaffold, which defines the surface density of ligands, and by the specific surface area of the scaffold, which defines the total surface of the structure exposed to the cells. It has been previously shown that collagen-glycosaminoglycan (CG) scaffolds used for studies of skin regeneration were inactive when the mean pore size was either lower than 20 microm or higher than 120 microm (Proc. Natl. Acad. Sci., USA 86(3) (1989) 933). To study the relationship between cell attachment and viability in scaffolds and the scaffold structure, CG scaffolds with a constant composition and solid volume fraction (0.005), but with four different pore sizes corresponding to four levels of specific surface area were manufactured using a lyophilization technique. MC3T3-E1 mouse clonal osteogenic cells were seeded onto the four scaffold types and maintained in culture. At the experimental end point (24 or 48 h), the remaining viable cells were counted to determine the percent cell attachment. A significant difference in viable cell attachment was observed in scaffolds with different mean pore sizes after 24 and 48 h; however, there was no significant change in cell attachment between 24 and 48 h for any group. The fraction of viable cells attached to the CG scaffold decreased with increasing mean pore size, increasing linearly (R2 = 0.95, 0.91 at 24 and 48 h, respectively) with the specific surface area of the scaffold. The strong correlation between the scaffold specific surface area and cell attachment indicates that cell attachment and viability are primarily influenced by scaffold specific surface area over this range (95.9-150.5 microm) of pore sizes for MC3T3 cells.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Polymer surface modification for the attachment of bioactive compounds

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Potential of nanofiber matrix as tissue-engineering scaffolds.

              Tissue-engineering scaffolds should be analogous to native extracellular matrix (ECM) in terms of both chemical composition and physical structure. Polymeric nanofiber matrix is similar, with its nanoscaled nonwoven fibrous ECM proteins, and thus is a candidate ECM-mimetic material. Techniques such as electrospinning to produce polymeric nanofibers have stimulated researchers to explore the application of nanofiber matrix as a tissue-engineering scaffold. This review covers the preparation and modification of polymeric nanofiber matrix in the development of future tissue-engineering scaffolds. Major emphasis is also given to the development and applications of aligned, core shell-structured, or surface-functionalized polymer nanofibers. The potential application of polymer nanofibers extends far beyond tissue engineering. Owing to their high surface area, functionalized polymer nanofibers will find broad applications as drug delivery carriers, biosensors, and molecular filtration membranes in future.
                Bookmark

                Author and article information

                Journal
                Int J Mol Sci
                Int J Mol Sci
                ijms
                International Journal of Molecular Sciences
                MDPI
                1422-0067
                15 January 2019
                January 2019
                : 20
                : 2
                : 326
                Affiliations
                [1 ]Department of Biomedical Engineering, National Cheng Kung University, 1 University Rd., Tainan 701, Taiwan; jeff.qbmc@ 123456yahoo.com.tw (T.-H.L.); whc32002@ 123456hotmail.com (H.-C.W.); iloveuk4ever@ 123456gmail.com (W.-H.C.)
                [2 ]Department of Orthopedics, China Medical University Hospital, 2 Yude Rd., Taichung 40447, Taiwan; d4749@ 123456mail.cmuh.org.tw
                [3 ]Medical Device Innovation Center, National Cheng Kung University, 1 University Rd., Tainan 701, Taiwan
                Author notes
                [* ]Correspondence: mlyeh@ 123456mail.ncku.edu.tw ; Tel.: +886-6-2757575 (ext. 63429)
                Author information
                https://orcid.org/0000-0001-6942-060X
                Article
                ijms-20-00326
                10.3390/ijms20020326
                6359257
                30650528
                1ec0b90f-80cf-439b-9608-dca8feb4397f
                © 2019 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 08 December 2018
                : 11 January 2019
                Categories
                Article

                Molecular biology
                bilayer,chondrocyte,plga,tyramine,osteochondral regeneration
                Molecular biology
                bilayer, chondrocyte, plga, tyramine, osteochondral regeneration

                Comments

                Comment on this article