21
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      A Mesoporous SiO2/γ-Fe2O3/KI Heterogeneous Magnetic Catalyst for the Green Synthesis of Biodiesel

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A magnetic catalyst (sample MCat) consisting of KI supported on a mixture of silica and maghemite (γ-Fe2O3) was prepared and used in the transesterification reaction for the synthesis of biodiesel. The energy dispersive X-ray spectrum of the catalyst showed signals due to Si, Fe, K, and I. Powder X-ray diffraction data revealed the amorphous nature of the SiO2 and the duly impregnation of the support with KI. 57Fe Mössbauer spectroscopy and magnetization measurements confirmed the ferrimagnetic iron oxide in the catalyst to be maghemite. N2 adsorption-desorption data indicated that the silica is mesoporous with a specific area of 352 m2 g-1, enabling the impregnation of 40 and 11 wt.% of KI and maghemite, respectively, according to the chemical composition obtained by the X-ray fluorescence measurements. The MCat was found to be efficient in the transesterification reaction in the macaúba and soybean oils. The MCat was easily removed from the reaction medium, with a hand magnet, and efficiently reused for more four consecutive reaction cycles. The good catalytic activity along with its magnetic behavior, high chemical stability and recyclability make the MCat a suitable material for the green synthesis of biodiesel.

          Related collections

          Most cited references35

          • Record: found
          • Abstract: found
          • Article: not found

          Tantalum-based semiconductors for solar water splitting.

          Solar energy utilization is one of the most promising solutions for the energy crises. Among all the possible means to make use of solar energy, solar water splitting is remarkable since it can accomplish the conversion of solar energy into chemical energy. The produced hydrogen is clean and sustainable which could be used in various areas. For the past decades, numerous efforts have been put into this research area with many important achievements. Improving the overall efficiency and stability of semiconductor photocatalysts are the research focuses for the solar water splitting. Tantalum-based semiconductors, including tantalum oxide, tantalate and tantalum (oxy)nitride, are among the most important photocatalysts. Tantalum oxide has the band gap energy that is suitable for the overall solar water splitting. The more negative conduction band minimum of tantalum oxide provides photogenerated electrons with higher potential for the hydrogen generation reaction. Tantalates, with tunable compositions, show high activities owning to their layered perovskite structure. (Oxy)nitrides, especially TaON and Ta3N5, have small band gaps to respond to visible-light, whereas they can still realize overall solar water splitting with the proper positions of conduction band minimum and valence band maximum. This review describes recent progress regarding the improvement of photocatalytic activities of tantalum-based semiconductors. Basic concepts and principles of solar water splitting will be discussed in the introduction section, followed by the three main categories regarding to the different types of tantalum-based semiconductors. In each category, synthetic methodologies, influencing factors on the photocatalytic activities, strategies to enhance the efficiencies of photocatalysts and morphology control of tantalum-based materials will be discussed in detail. Future directions to further explore the research area of tantalum-based semiconductors for solar water splitting are also discussed.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Microfabrication of an asymmetric, multi-layered microdevice for controlled release of orally delivered therapeutics.

            The creation of an oral drug delivery platform to administer chemotherapeutic agents effectively can not only increase patient compliance, but also potentially diminish drug toxicity. A microfabricated device offers advantages over conventional drug delivery technology. Here we describe the development of a multi-layered polymeric drug-loaded microfabricated device (microdevice) for the oral delivery of therapeutics, which offers unidirectional release of multiple therapeutics. The imaging and release of therapeutics from the multi-layered device was performed with three different fluorescently labeled albumins. The release of insulin and chemotherapeutic camptothecin was also observed to be released in a controlled manner over the course of 180 min in vitro. Furthermore, asymmetric delivery was shown to concentrate drug at the device/cell interface, wherein 10 times more drug permeated an intestinal epithelial cell monolayer, compared to unprotected drug-loaded hydrogels. The bioactivity of the released chemotherapeutic was shown with cytostasis of colorectal adenocarcinoma cells. Cytostasis of drug loaded hydrogels was significantly higher than control empty hydrogel laden microdevices. Our results conclude that microfabrication of a hydrogel laden microdevice leads to a viable oral delivery platform for chemotherapeutics.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Green Chem.

                Bookmark

                Author and article information

                Contributors
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Journal
                jbchs
                Journal of the Brazilian Chemical Society
                J. Braz. Chem. Soc.
                Sociedade Brasileira de Química
                1678-4790
                December 2016
                : 27
                : 12
                : 2290-2299
                Affiliations
                [1 ] Universidade Federal dos Vales do Jequitinhonha e Mucuri Brazil
                [2 ] Universidade Federal de Minas Gerais Brazil
                [3 ] Universidade Federal de Minas Gerais Brazil
                [4 ] Universidade Federal dos Vales do Jequitinhonha e Mucuri Brazil
                Article
                S0103-50532016001202290
                10.5935/0103-5053.20160124
                4759bb64-9c39-443f-871a-2af9dd588323

                This work is licensed under a Creative Commons Attribution 4.0 International License.

                History
                Product

                SciELO Brazil

                Self URI (journal page): http://www.scielo.br/scielo.php?script=sci_serial&pid=0103-5053&lng=en
                Categories
                CHEMISTRY, MULTIDISCIPLINARY

                General chemistry
                biofuel,transesterification,heterogeneous catalyst,palm oil,soybean oil
                General chemistry
                biofuel, transesterification, heterogeneous catalyst, palm oil, soybean oil

                Comments

                Comment on this article