Antioxidant evaluation of Fumaria parviflora L. extract loaded nanocapsules obtained by green extraction methods in oxidative stability of sunflower oil

The barberry (Berberis vulgaris) extract which is a rich source of anthocyanins was used for spray drying encapsulation with three different wall materials, i.e., combination of maltodextrin and gum Arabic (MD+GA), maltodextrin and gelatin (MD+GE), and maltodextrin (MD). Response Surface Methodology (RSM) was applied for optimization of microencapsulation efficiency and physical properties of encapsulated powders considering wall material type as well as different ratios of core to wall materials as independent variables. Physical characteristics of spray-dried powders were investigated by further analyses of moisture content, hygroscopicity, degree of caking, solubility, bulk and absolute density, porosity, flowability and microstructural evaluation of encapsulated powders. Our results indicated that samples produced with MD+GA as wall materials represented the highest process efficiency and best powder quality; the optimum conditions of microencapsulation process for barberry anthocyanins were found to be the wall material content and anthocyanin load of 24.54% and 13.82%, respectively. Under such conditions, the microencapsulation efficiency (ME) of anthocyanins could be as high as 92.83%.

In this work, anthocyanin stability and color of encapsulated freeze-dried saffron petal's extract with various matrices consisting gum Arabic (AG) and maltodextrin (M7 and M20) were studied. Total anthocyanins of powders and color parameters (a*, b*, L*, C, H° and TCD) were measured immediately after production and during storage up to 10 weeks by pH differential method and computer vision, respectively. Different compounds of wall materials did not show any significant differences in terms of stabilizing anthocyanins (P M20>M7. By evaluating 3D surface and Cox trace plots it was revealed that wall formulas which had the lowest amount of AG and highest amounts of M20 and M7 showed the lowest total color differences after storage (P<0.05). To conclude, microencapsulation by freeze drying could be recommended as a suitable method for stabilizing anthocyanins of saffron petal's extract.